FitMatch
Ryobi 10" (254mm) Pole Pruner Replacement Chain RCHC10 (56 drive links)

Chainsaw chain

Ryobi 10" (254mm) Pole Pruner Replacement Chain RCHC10 (56 drive links)

RCHC10

Fits 2 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

See seller

Ryobi Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Ryobi. Compatible: another brand.

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

Ryobi AustraliaGenuine · no price recordedSee priceOpen
BunningsGenuine · no price recordedSee priceOpen

How long it lasts

Replace it when it cuts noticeably worse, Ryobi says.

After replacing: No reset needed. Check the chain tension often while a new chain beds in.

How to change the RCHC10 chain

Watch the guide or follow the steps.

18V ONE+ Brushless Chainsaw: How to assemble & Safely use · RYOBI® TV (official)
  1. 1Remove the battery pack and put on heavy-duty gloves.
  2. 2Loosen the chain tension: on tool-free models turn the chain tensioner knob anticlockwise to unlock the adjustment ring, then turn the ring anticlockwise.
  3. 3Loosen and remove the sprocket cover, then take off the bar and old chain.
  4. 4Fit the new chain in the bar groove with a loop at the back of the bar and the cutters facing the direction of rotation (turn the loop over if they face backwards).
  5. 5Place the loop around the drive sprocket, lower the bar onto the bolt and refit the sprocket cover.
  6. 6Tension the chain (Ryobi gives a 4–5.5 mm gap between the drive teeth and the bar on the 12" saw), then lock the tensioner knob.
Every number this part goes by
Retail name:
RCHC10

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 2 Ryobi models

Ryobi2 models

R36PPS120. Ryobi names RCHC10 (10" bar, 56 drive links) for the R36PPS120. R36PPS124 is the 4Ah kit of the same pole pruner.

REPRUA20. Ryobi names RCHC10 (10" bar, 56 drive links) for the REPRUA20.

Common questions
What does the RCHC10 fit?
The Ryobi 10" (254mm) Pole Pruner Replacement Chain RCHC10 (56 drive links) fits the Ryobi R36PPS120 and REPRUA20.
Where can I buy the RCHC10 in Australia?
We link to 2 Australian sellers for the RCHC10; the seller's page shows the current price.
How do I fit the RCHC10?
6 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A blunt or stretched chain cuts slowly, throws dust instead of chips, and makes the saw harder to control.
Is there anything to reset afterwards?
No reset needed. Check the chain tension often while a new chain beds in.

Something looks wrong with the RCHC10 match? . Reports go to a person, not a bot.