FitMatch
Ryobi 12" Titanium Chainsaw Chain RCHT12 (45 drive links)

Chainsaw chain

Ryobi 12" Titanium Chainsaw Chain RCHT12 (45 drive links)

RCHT12

Fits 3 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

See seller

Ryobi Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Ryobi. Compatible: another brand.

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

Ryobi AustraliaGenuine · no price recordedSee priceOpen
BunningsGenuine · no price recordedSee priceOpen

How long it lasts

Replace it when it cuts noticeably worse, Ryobi says.

After replacing: No reset needed. Check the chain tension often while a new chain beds in.

How to change the RCHT12 chain

Watch the guide or follow the steps.

18V ONE+ Brushless Chainsaw: How to assemble & Safely use · RYOBI® TV (official)
  1. 1Remove the battery pack and put on heavy-duty gloves.
  2. 2Loosen the chain tension: on tool-free models turn the chain tensioner knob anticlockwise to unlock the adjustment ring, then turn the ring anticlockwise.
  3. 3Loosen and remove the sprocket cover, then take off the bar and old chain.
  4. 4Fit the new chain in the bar groove with a loop at the back of the bar and the cutters facing the direction of rotation (turn the loop over if they face backwards).
  5. 5Place the loop around the drive sprocket, lower the bar onto the bolt and refit the sprocket cover.
  6. 6Tension the chain (Ryobi gives a 4–5.5 mm gap between the drive teeth and the bar on the 12" saw), then lock the tensioner knob.
Every number this part goes by
Retail name:
RCHT12

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 3 Ryobi models

OCS1830BL. Ryobi names RCHT12 (12" bar, 45 drive links) for the OCS1830BL. RCS1830BLX4 is the 4Ah kit of the same saw.

R36XCHS10. Ryobi names RCHT12 (12" bar, 45 drive links) for the R36XCHS10. R36XCHS14 is the 4Ah kit of the same saw.

R36XCHS114. Ryobi gives this kit a 12" bar, 3/8" pitch, 0.043" gauge and 45 drive links, the same as the R36XCHS10. Check the drive links on your old chain.

Common questions
What does the RCHT12 fit?
The Ryobi 12" Titanium Chainsaw Chain RCHT12 (45 drive links) fits the Ryobi OCS1830BL, R36XCHS10 and R36XCHS114.
Where can I buy the RCHT12 in Australia?
We link to 2 Australian sellers for the RCHT12; the seller's page shows the current price.
How do I fit the RCHT12?
6 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A blunt or stretched chain cuts slowly, throws dust instead of chips, and makes the saw harder to control.
Is there anything to reset afterwards?
No reset needed. Check the chain tension often while a new chain beds in.

Something looks wrong with the RCHT12 match? . Reports go to a person, not a bot.