FitMatch
Ryobi 18" Titanium Chainsaw Chain RCHT18 (62 drive links)

Chainsaw chain

Ryobi 18" Titanium Chainsaw Chain RCHT18 (62 drive links)

RCHT18

Fits 2 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

See seller

Bunnings · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Ryobi. Compatible: another brand.

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

BunningsGenuine · no price recordedSee priceOpen
Ryobi AustraliaGenuine · no price recordedSee priceOpen

How long it lasts

Replace it when it cuts noticeably worse, Ryobi says.

After replacing: No reset needed. Check the chain tension often while a new chain beds in.

How to change the RCHT18 chain

Watch the guide or follow the steps.

18V ONE+ Brushless Chainsaw: How to assemble & Safely use · RYOBI® TV (official)
  1. 1Stop the engine and wait for the chain to stop (on a battery saw, remove the battery pack), then put on heavy-duty gloves.
  2. 2Loosen the chain tension: on tool-free models turn the chain tensioner knob anticlockwise to unlock the adjustment ring, then turn the ring anticlockwise.
  3. 3Loosen and remove the sprocket cover, then take off the bar and old chain.
  4. 4Fit the new chain in the bar groove with a loop at the back of the bar and the cutters facing the direction of rotation (turn the loop over if they face backwards).
  5. 5Place the loop around the drive sprocket, lower the bar onto the bolt and refit the sprocket cover.
  6. 6Tension the chain (Ryobi gives a 4–5.5 mm gap between the drive teeth and the bar on the 12" saw), then lock the tensioner knob.
Every number this part goes by
Retail name:
RCHT18

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 2 Ryobi models

Ryobi2 models

RCS36HP. Ryobi names RCHT18 (18" bar, 62 drive links) for the RCS36HP. R36XCHS26 is the 6Ah kit of the same saw.

RCS3845. Ryobi names RCHT18 (18" bar, 62 drive links) for the RCS3845.

Common questions
What does the RCHT18 fit?
The Ryobi 18" Titanium Chainsaw Chain RCHT18 (62 drive links) fits the Ryobi RCS36HP and RCS3845.
Where can I buy the RCHT18 in Australia?
We link to 2 Australian sellers for the RCHT18; the seller's page shows the current price.
How do I fit the RCHT18?
6 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A blunt or stretched chain cuts slowly, throws dust instead of chips, and makes the saw harder to control.
Is there anything to reset afterwards?
No reset needed. Check the chain tension often while a new chain beds in.

Something looks wrong with the RCHT18 match? . Reports go to a person, not a bot.