Chainsaw chain
STIHL 71 PM3 saw chain 3670 000 0028 (28 drive links, 10 cm bar)
3670 000 0028
Fits 1 model
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine STIHL
$25.00
STIHL Australia · 28 OctLowest genuine · STIHL Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by STIHL. Compatible: another brand.Genuine is made by STIHL. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $25.00
STIHL Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens STIHL Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it once any cutter's service marks are no longer visible, STIHL says; check the chain before work and sharpen it when it is blunt.
After replacing: No reset needed. Check the chain tension often while a new chain beds in.
How to change the 3670 000 0028 chain
Watch the guide or follow the steps.
- 1Stop the engine and engage the chain brake. On a battery saw, take the battery out; on an electric saw, unplug it. Put on sturdy work gloves: the cutters are sharp.
- 2Undo the nut and take off the chain sprocket cover. On models with the quick chain tensioner (C-B, C-BE), open the wing-nut handle and undo the wing nut instead.
- 3Slacken the chain (turn the tensioning screw anticlockwise, or the tensioning gear clockwise on quick-tensioner models), then lift off the guide bar and the old chain.
- 4Fit the new chain in the bar groove so the arrows on the tie straps on top of the bar point in the direction of rotation, and seat the drive links on the chain sprocket.
- 5Put the bar back on with the tensioner peg in the hole in the bar, then turn the tensioning screw clockwise (the tensioning gear anticlockwise on quick-tensioner models) until the chain fits snugly against the bar and the drive links sit in the groove.
- 6Refit the chain sprocket cover flush with the saw and tighten the nut firmly (close the wing-nut handle on quick-tensioner models). STIHL says the chain expands and contracts as you cut, so check the tension regularly.
Every number this part goes by
- Retail name:
- 3670 000 0028
- Retail name:
- 3670-000-0028
- Retail name:
- 36700000028
- Retail name:
- 71 PM3 28
- Retail name:
- 71PM3 28
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits this STIHL model
STIHL1 model
Takes a 10 cm (4") bar with 28 drive links.
Common questions
- What does the 3670 000 0028 fit?
- The STIHL 71 PM3 saw chain 3670 000 0028 (28 drive links, 10 cm bar) fits the STIHL GTA 26.
- Where can I buy the 3670 000 0028 in Australia?
- We track 1 Australian seller for the 3670 000 0028; the lowest listed price when we last checked was A$25.00 at STIHL Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 3670 000 0028?
- 6 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A blunt or stretched chain cuts slowly, throws dust instead of chips, and makes the saw harder to control.
- Is there anything to reset afterwards?
- No reset needed. Check the chain tension often while a new chain beds in.
Something looks wrong with the 3670 000 0028 match? . Reports go to a person, not a bot.