Salt chlorinator cell
Pentair FreeFlo 15 g/h replacement cell 801933
801933
Fits 1 model
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Pentair
$519.00
Budget Pool Care · 31 OctLowest genuine · Budget Pool Care · checked 31 Oct
CompatibleCompatible option
$525.00
Pool & Spa Warehouse · 31 OctPool & Spa Warehouse · checked 31 Oct
Check sellerCheck seller details
Genuine: made by Pentair. Compatible: another brand.Genuine is made by Pentair. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $525.00
Pool & Spa Warehouse. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 3 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
1 seller
Opens Budget Pool Care in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when chlorine output stays low with the salt at about 4000 ppm, pH at 7.2 to 7.4, enough run time, a sound cell connection and the calcium cleaned off, Pentair says; it gives no set life.
After replacing: No reset needed. Switch the unit back on and set the output again.
How to change the 801933 chlorinator cell
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Turn the chlorinator off (Pentair says working on the cell with it on will damage the unit) and turn the filter pump off.
- 2Have the cell lead disconnected from the power pack: Pentair says only a qualified electrical technician should open it.
- 3Undo the cell lock nut and lift the old cell out of the cell casing.
- 4Fit the new cell with the cell union O-ring in place and tighten the lock nut by hand.
- 5Have the lead reconnected the same way, start the pump and check for leaks, then turn the chlorinator on and set the output.
Every number this part goes by
- Retail name:
- 801933
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits this Pentair model
Pentair1 model
Cell only: it fits your existing FreeFlo cell casing under the lock nut.
Common questions
- What does the 801933 fit?
- The Pentair FreeFlo 15 g/h replacement cell 801933 fits the Pentair FreeFlo FFCL-15-RPD.
- Where can I buy the 801933 in Australia?
- We track 3 Australian sellers for the 801933; the lowest listed price when we last checked was A$519.00 at Budget Pool Care. Prices are re-checked daily and dated on this page.
- How do I fit the 801933?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn cell makes too little chlorine, so the water turns green or cloudy, and turning the output up only wears it faster.
- Is there anything to reset afterwards?
- No reset needed. Switch the unit back on and set the output again.
Something looks wrong with the 801933 match? . Reports go to a person, not a bot.