Salt chlorinator cell
Pool Controls SG20 replacement cell 00551334
00551334
Fits 3 models
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Pool Controls
$899.00
Pool Shop · 1 NovLowest genuine · Pool Shop · checked 1 Nov
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Pool Controls. Compatible: another brand.Genuine is made by Pool Controls. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $899.00
Pool Shop. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Genuine Pool Controls
1 seller
Opens Pool Shop in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when chlorine output stays low after the salt level and water balance are right and the cell has been cleaned; Pool Controls gives no set life.
After replacing: No reset needed. Switch the chlorinator back on and set the cell output.
How to change the 00551334 chlorinator cell
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Turn the chlorinator and the filter pump off, and close the valves either side of the cell if you have them.
- 2Disconnect the cell lead.
- 3Undo the cell housing nut and draw the old cell out of the housing.
- 4Check the cell O-ring and fit the new cell, then tighten the housing nut by hand.
- 5Reconnect the lead, start the pump and check for leaks, then turn the chlorinator back on and set the output.
Every number this part goes by
- Retail name:
- 00551334
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits these 3 Pool Controls models
Pool Controls3 models
Cell only: it fits your existing cell housing under the housing nut.
Common questions
- What does the 00551334 fit?
- The Pool Controls SG20 replacement cell 00551334 fits the Pool Controls Gemini 20, SG20 and Sterisel 20.
- Where can I buy the 00551334 in Australia?
- We track 1 Australian seller for the 00551334; the lowest listed price when we last checked was A$899.00 at Pool Shop. Prices are re-checked daily and dated on this page.
- How do I fit the 00551334?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn cell makes too little chlorine, so the water turns green or cloudy, and turning the output up only wears it faster.
- Is there anything to reset afterwards?
- No reset needed. Switch the chlorinator back on and set the cell output.
Something looks wrong with the 00551334 match? . Reports go to a person, not a bot.