Salt chlorinator cell
Waterco Electrochlor 30A electrode assembly 64428511
64428511
Fits 2 models
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Waterco
See seller
No genuine seller tracked yetNo genuine seller tracked yet
CompatibleCompatible option
$385.00
Pool & Spa Warehouse · 31 OctPool & Spa Warehouse · checked 31 Oct
Check sellerCheck seller details
Genuine: made by Waterco. Compatible: another brand.Genuine is made by Waterco. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $385.00
Pool & Spa Warehouse. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 3 listings from 2 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
3 listings from 2 sellers
Opens Pool & Spa Warehouse in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it no longer makes enough chlorine even though the run time, output setting, salt level and water balance are right and the plates are clean, Waterco says; it gives no set life.
After replacing: No reset needed. Set the chlorinator back to On or Auto after fitting and check the output.
How to change the 64428511 chlorinator cell
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Set the chlorinator to off and turn the filter pump off.
- 2Disconnect the cables from the cell's terminals.
- 3Unscrew the barrel unions and take the cell off the pipework, then remove the old electrode assembly from the cell body.
- 4Fit the new electrode assembly with its O-rings seated, refit the cell and tighten the unions.
- 5Reconnect the cables, start the pump and check for leaks, then turn the chlorinator back on.
Every number this part goes by
- Retail name:
- 64428511
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits these 2 Waterco models
Waterco2 models
Electrode assembly only: it fits your existing cell body.
Common questions
- What does the 64428511 fit?
- The Waterco Electrochlor 30A electrode assembly 64428511 fits the Waterco Electrochlor 30A and Waterchlor 40.
- Where can I buy the 64428511 in Australia?
- We track 2 Australian sellers for the 64428511; the lowest listed price when we last checked was A$385.00 at Pool & Spa Warehouse. Prices are re-checked daily and dated on this page.
- How do I fit the 64428511?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn cell makes too little chlorine, so the water turns green or cloudy, and turning the output up only wears it faster.
- Is there anything to reset afterwards?
- No reset needed. Set the chlorinator back to On or Auto after fitting and check the output.
Something looks wrong with the 64428511 match? . Reports go to a person, not a bot.