Salt chlorinator cell
Waterco Electrochlor 25A SC MK2 cell plate assembly 64428612
64428612
Fits 1 model
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Waterco
$985.00
Pool Shop · 31 OctLowest genuine · Pool Shop · checked 31 Oct
CompatibleCompatible option
$695.17
Pool Shop · 31 OctPool Shop · checked 31 Oct
Check sellerCheck seller details
Genuine: made by Waterco. Compatible: another brand.Genuine is made by Waterco. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $695.17
Pool Shop. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 3 listings from 2 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
2 sellers
Opens Pool Shop in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it no longer makes enough chlorine even though the run time, output setting, salt level and water balance are right and the plates are clean, Waterco says; it gives no set life.
After replacing: No reset needed. Set the chlorinator back to On or Auto after fitting and check the output.
How to change the 64428612 chlorinator cell
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Set the chlorinator to off and turn the filter pump off.
- 2Pull off the cell terminal cap and disconnect the cables from the cell's brass connectors.
- 3Undo the 65 mm lock nut on the cell housing and draw out the old plate assembly.
- 4Fit the new plate assembly with the 65 mm O-ring seated and tighten the lock nut by hand.
- 5Reconnect the cables and the terminal cap, start the pump and check for leaks, then set the chlorinator back to On or Auto.
Every number this part goes by
- Retail name:
- 64428612
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits this Waterco model
Waterco1 model
Plate assembly only: it fits your existing cell housing under the 65 mm lock nut.
Common questions
- What does the 64428612 fit?
- The Waterco Electrochlor 25A SC MK2 cell plate assembly 64428612 fits the Waterco Electrochlor 25A SC.
- Where can I buy the 64428612 in Australia?
- We track 2 Australian sellers for the 64428612; the lowest listed price when we last checked was A$695.17 at Pool Shop. Prices are re-checked daily and dated on this page.
- How do I fit the 64428612?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn cell makes too little chlorine, so the water turns green or cloudy, and turning the output up only wears it faster.
- Is there anything to reset afterwards?
- No reset needed. Set the chlorinator back to On or Auto after fitting and check the output.
Something looks wrong with the 64428612 match? . Reports go to a person, not a bot.