Salt chlorinator cell
Zodiac Clearwater LM3-15 electrode W196564
W196564
Fits 1 model
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Zodiac
$1120.00
Heater and Spa Parts · 31 OctLowest genuine · Heater and Spa Parts · checked 31 Oct
CompatibleCompatible option
$495.46
Pool Shop · 31 OctPool Shop · checked 31 Oct
Check sellerCheck seller details
Genuine: made by Zodiac. Compatible: another brand.Genuine is made by Zodiac. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $495.46
Pool Shop. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
1 seller
Opens Pool Shop in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when the low-salt light stays on even though the salt level is right and the cell is clean, Zodiac says; fit the cell made for your model, or the chlorinator will not work properly.
After replacing: No reset needed. Once water flows through the new cell the controller reads it again; set the output again if you changed it while the cell was out.
How to change the W196564 chlorinator cell
Watch the guide or follow the steps.
- 1Switch off the filter pump and the chlorinator, and close any valves either side of the cell.
- 2Unplug the cell terminal cap (the cell head and plug).
- 3Unscrew the retaining ring and lift the old electrode out of the cell housing.
- 4Fit the new electrode with its O-ring in place and screw the retaining ring back on by hand. Use the electrode made for your model.
- 5Refit the cell head and plug, reset the valves and switches, and turn the pump and chlorinator back on.
Every number this part goes by
- Retail name:
- W196564
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits this Zodiac model
Zodiac1 model
Electrode only: it fits your existing cell housing under the retaining ring. Zodiac says to fit the electrode made for your model.
Common questions
- What does the W196564 fit?
- The Zodiac Clearwater LM3-15 electrode W196564 fits the Zodiac LM3-15.
- Where can I buy the W196564 in Australia?
- We track 2 Australian sellers for the W196564; the lowest listed price when we last checked was A$495.46 at Pool Shop. Prices are re-checked daily and dated on this page.
- How do I fit the W196564?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn cell makes too little chlorine, so the water turns green or cloudy, and turning the output up only wears it faster.
- Is there anything to reset afterwards?
- No reset needed. Once water flows through the new cell the controller reads it again; set the output again if you changed it while the cell was out.
Something looks wrong with the W196564 match? . Reports go to a person, not a bot.