FitMatch
Oliveri FR5910 inline filter cartridge, standard water (1 micron)

Filtered water tap water filter

Oliveri FR5910 inline filter cartridge, standard water (1 micron)

FR5910

Fits 1 model · replace every 12 months

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$124.00

Cass Brothers · 29 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Oliveri. Compatible: another brand. Check certification on the seller's page.

Lowest price · $124.00

Cass Brothers. Every seller we track is listed below. Some links earn us a commission.

Open Cass Brothers

Compare 5 listings from 4 sellers

AUD, before delivery. Each price shows when it was checked.

Cass BrothersGenuine · checked 29 Oct$124.00Open
BuildmatGenuine · checked 29 Oct$124.00Open
eBay AUGenuine · checked 26 Oct$129.00Open
eBay AUGenuine · checked 26 Oct$129.99Open
The Good GuysGenuine · checked 26 Oct$165.00Open
Open cheapest seller · $124.00

Opens Cass Brothers in a new tab. Their page is the source of truth for price, delivery and returns.

Not due yet?

Get a nudge when your water filter is due — it's every 12 months. One email two weeks before, no newsletter. Manage or stop it anytime.

Also saves the model to a FitMatch account under this address; the email signs you in, no password.

How to change the FR5910 water filter

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Turn off the cold water at the under-sink isolation valve; Oliveri also suggests turning it off at the mains.
  2. 2Turn the filtered tap on to let the pressure out of the filter system.
  3. 3Twist the old cartridge to the left and pull it down out of the head.
  4. 4Line up the notches on the new cartridge with the head, push it up and twist it to the right.
  5. 5Turn the water back on, run the filtered tap for 2–3 minutes to clear the air (cloudy water clears), then turn it off and check for leaks.
  6. 6Write the date on the pink sticker and stick it on the cartridge.
Every number this part goes by
Retail name:
FR5910
Retail name:
FR5910-01
Retail name:
FR5910-1

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits this Oliveri model

Oliveri1 model

Common questions
What does the FR5910 fit?
The Oliveri FR5910 inline filter cartridge, standard water (1 micron) fits the Oliveri FS5010-LF.
How often should I replace the FR5910?
Every 12 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
Where can I buy the FR5910 in Australia?
We track 4 Australian sellers for the FR5910; the lowest listed price when we last checked was A$124.00 at Cass Brothers. Prices are re-checked daily and dated on this page.
How do I fit the FR5910?
No tools, a few minutes: 6 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
The carbon stops reducing chlorine taste and odour and the flow from the tap slows as the cartridge clogs; a boiling-water tap with a scale-reducing filter builds scale in its tank faster.
Is there anything to reset afterwards?
No reset button. Write the change date on the sticker supplied with the cartridge; Oliveri also offers email reminders when you register the filter.

Something looks wrong with the FR5910 match? . Reports go to a person, not a bot.