FitMatch

Evaporative cooler pad kit

Bonaire Filtercool pad 6080140SP (small, single: Summer Breeze SBB800, Celair CP750)

6080140SP

Fits 2 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$148.37

Bonaire · 1 Nov

Compatible

$77.75 each

4-pack $311.00

Plumbonline · 1 Nov

Check seller

Genuine: made by Bonaire. Compatible: another brand.

Lowest compatible · $77.75 each · 4-pack $311.00

Plumbonline. Compare with genuine below. Some links earn us a commission.

Open Plumbonline

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

PlumbonlineCompatible · checked 1 Nov$77.75 each4-pack $311.00Open
BonaireGenuine · checked 1 Nov$148.37Open
Open cheapest seller · $77.75 each · 4-pack $311.00

Opens Plumbonline in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when the pads are damaged or blocked, Bonaire says; check and hose them down at the start and end of summer, and have the cooler serviced every year.

After replacing: No pad reminder to reset. If your installer turned on the service reminder, the spanner icon on the Bonaire Navigator control appears after 700 hours of running; it is a service reminder, not a pad timer. Bonaire's Pad Clean function (Navigator control) runs a 20-minute wash of the pads.

How to change the 6080140SP evaporative cooler pad kit

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Isolate the cooler from the power before any work. Ensure the roof is safe to access, your ladder is securely positioned and use suitable safety equipment, Bonaire says; it recommends its trained service technicians or an authorised Climate Technologies service provider for this work.
  2. 2Remove a louvre: undo the thumb (transit) screw at its top, slide the louvre upward and lift it out of the unit.
  3. 3Take the old pad out of the louvre panel: remove the old clips, or cut off the old plastic retaining spikes with side cutters.
  4. 4Place the new pad in the louvre panel and fix it with new Filtercool clips and washers (retaining spikes on older units), pushed through the pad onto the vertical ribs until the pad sits firm against them.
  5. 5Refit the louvre and repeat for the others, then restore the power and run the cooler. Check the pads wet evenly; the Navigator control's Pad Clean function runs a 20-minute wash.
Every number this part goes by
Retail name:
6080140SP

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 2 models

Bonaire1 model

Celair1 model

Bonaire SBB800. Bonaire sells these pads singly: buy one per louvre panel (four).

Celair CP750. This is the pad for the Celair CP750 made from 2015 (product code 6070022). The earlier Profile CP750 takes a larger pad. Bonaire sells these pads singly: buy one per louvre panel (four).

Common questions
What does the 6080140SP fit?
The Bonaire Filtercool pad 6080140SP (small, single: Summer Breeze SBB800, Celair CP750) fits the Bonaire SBB800 and Celair CP750.
Where can I buy the 6080140SP in Australia?
We track 2 Australian sellers for the 6080140SP; the lowest listed price when we last checked was A$77.75 at Plumbonline. Prices are re-checked daily and dated on this page.
How do I fit the 6080140SP?
5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Clogged pads pass less air and water, so the cooler blows warmer air, and old pads can smell musty.
How do I reset the reminder?
No pad reminder to reset. If your installer turned on the service reminder, the spanner icon on the Bonaire Navigator control appears after 700 hours of running; it is a service reminder, not a pad timer. Bonaire's Pad Clean function (Navigator control) runs a 20-minute wash of the pads.

Something looks wrong with the 6080140SP match? . Reports go to a person, not a bot.