FitMatch
Breezair Chillcel large pad 4-pack 114613 (90 mm)

Evaporative cooler pad kit

Breezair Chillcel large pad 4-pack 114613 (90 mm)

114613

Fits 26 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$471.00

HVAC Shop · 1 Nov

Compatible

$420.00

Plumbonline · 1 Nov

Check seller

Genuine: made by Breezair. Compatible: another brand.

Lowest compatible · $420.00

Plumbonline. Compare with genuine below. Some links earn us a commission.

Open Plumbonline

Compare 3 sellers

AUD, before delivery. Each price shows when it was checked.

PlumbonlineCompatible · checked 1 Nov$420.00Open
HVAC ShopGenuine · checked 1 Nov$471.00Open
Seeley InternationalGenuine · no price recordedSee priceOpen
Open cheapest seller · $420.00

Opens Plumbonline in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when the pads are salted up, Breezair says; have them checked at the service before summer, which Seeley asks for at least every 2 years on a home cooler.

After replacing: No pad reminder to reset. After fitting new pads, run Pad Flush from the MagIQtouch settings menu if your cooler has one, or fill the tank, run the pump for about 5 minutes and drain it, to clear the smell of new pads.

How to change the 114613 evaporative cooler pad kit

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Turn the cooler off at the wall control, then switch it off at the isolating switch inside the cooler. Seeley recommends an authorised Seeley dealer or service agent for any work on the roof: climbing onto the roof is hazardous, and its manuals say maintenance is for a qualified, licensed technician.
  2. 2Working at heights needs extra safety precautions, Seeley warns: only go up if you can reach the cooler safely. Remove each pad frame: take out the clips, lever the top of the frame away from the lid with a flat screwdriver, pivot it outwards and lift it off.
  3. 3Note where each frame came from. Thicker or rebated pads (EXS, EXH210, EXQ210, EZQ215) must go back in the same place: stickers on the fan scroll show the positions. On sloping-base models (EZQ, EZH, EV, EZ) refit the front and two tapered pads from the 3-pack where the old ones were.
  4. 4Pull out the pad pins and washers and lift out the old pads. Fit each new Chillcel pad with its 30 mm header block at the top, and push new pins through until the pin heads sit flush with the frame and the washers sit flush with the pad.
  5. 5Refit the frames and clips, switch the power back on and run the cooler; never run it with the pad frames off. Flush the new pads: use Pad Flush in the MagIQtouch settings menu if you have it, or fill the tank, run the pump for about 5 minutes and drain it.
Every number this part goes by
Retail name:
114613

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 26 Breezair models

EXH210. On the EXH210 the side pads facing the fan scroll may be 100 mm (they have a rebate at the base): put each pad back where it came from.

EXQ210. Seeley's manual says the EXQ210's pads vary from the standard 90 mm thickness: note where each frame came from and check the stickers on the fan scroll before refitting.

EZQ215. Seeley's parts list gives this sloping-base model two packs: this 4-pack (114613) and the tapered 3-pack 114576. A full re-pad takes both. Seeley's manual says the EZQ215's pads vary from the standard 90 mm thickness, so put each pad back where it came from.

EV195, EV215, EZ195, EZ215, EZH215. Seeley's parts list gives this sloping-base model two packs: this 4-pack (114613) and the tapered 3-pack 114576. A full re-pad takes both.

Common questions
What does the 114613 fit?
The Breezair Chillcel large pad 4-pack 114613 (90 mm) fits 26 Breezair models, including the EM145, EM165 and EM190. Every one is listed on this page.
Where can I buy the 114613 in Australia?
We track 3 Australian sellers for the 114613; the lowest listed price when we last checked was A$420.00 at Plumbonline. Prices are re-checked daily and dated on this page.
How do I fit the 114613?
5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Clogged pads pass less air and water, so the cooler blows warmer air, and old pads can smell musty.
How do I reset the reminder?
No pad reminder to reset. After fitting new pads, run Pad Flush from the MagIQtouch settings menu if your cooler has one, or fill the tank, run the pump for about 5 minutes and drain it, to clear the smell of new pads.

Something looks wrong with the 114613 match? . Reports go to a person, not a bot.