Evaporative cooler pad kit
Brivis pads and mesh set 81000394 (4 x 753 x 430 x 75 mm)
81000394
Fits 5 models
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Brivis
$327.00
HVAC Shop · 1 NovLowest genuine · HVAC Shop · checked 1 Nov
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Brivis. Compatible: another brand.Genuine is made by Brivis. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $327.00
HVAC Shop. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens HVAC Shop in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when the pad material has holes or has broken down and no longer soaks up water, Brivis says; it lists pads as a consumable to check from the fifth year at its two-yearly service.
After replacing: No pad reminder to reset. After new pads are fitted, the cooler runs a Pre-Wet to soak them before the fan starts; a mild smell from new pads is normal and clears quickly, Brivis says.
How to change the 81000394 evaporative cooler pad kit
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Brivis says its coolers must be maintained only by an authorised person, and recommends an authorised Brivis service technician: book one through Rinnai's Brivis service line. Before any work, switch the cooler off at the wall control and at its power isolating switch.
- 2The cooler must have safe and reasonable access, Brivis says; some installations need two service people. Do not go onto the roof without safe access.
- 3Check the old pads: Brivis says pads deteriorate over time and lose their ability to soak up water, so replace them when the material has holes or has broken down.
- 4Fit the new pad set in place of the old pads, then clean and flush the pads with water.
- 5With the pads in position, switch the isolating switch back on and run the cooler. Check the pump runs and the pads wet evenly; a mild smell from new pads is normal and clears quickly.
Every number this part goes by
- Retail name:
- 81000394
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits these 5 Brivis models
Brivis5 models
Common questions
- What does the 81000394 fit?
- The Brivis pads and mesh set 81000394 (4 x 753 x 430 x 75 mm) fits 5 Brivis models, including the AD20, AD30 and Sundowner 5. Every one is listed on this page.
- Where can I buy the 81000394 in Australia?
- We track 1 Australian seller for the 81000394; the lowest listed price when we last checked was A$327.00 at HVAC Shop. Prices are re-checked daily and dated on this page.
- How do I fit the 81000394?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Clogged pads pass less air and water, so the cooler blows warmer air, and old pads can smell musty.
- How do I reset the reminder?
- No pad reminder to reset. After new pads are fitted, the cooler runs a Pre-Wet to soak them before the fan starts; a mild smell from new pads is normal and clears quickly, Brivis says.
Something looks wrong with the 81000394 match? . Reports go to a person, not a bot.