FitMatch
Brivis AD pad set 81012818 (4 x 750 x 480 x 75 mm)

Evaporative cooler pad kit

Brivis AD pad set 81012818 (4 x 750 x 480 x 75 mm)

81012818

Fits 18 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$359.00

HVAC Shop · 1 Nov

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Brivis. Compatible: another brand.

Lowest price · $359.00

HVAC Shop. Every seller we track is listed below. Some links earn us a commission.

Open HVAC Shop

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

HVAC ShopGenuine · checked 1 Nov$359.00Open
Open cheapest seller · $359.00

Opens HVAC Shop in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when the pad material has holes or has broken down and no longer soaks up water, Brivis says; it lists pads as a consumable to check from the fifth year at its two-yearly service.

After replacing: No pad reminder to reset. After new pads are fitted, the cooler runs a Pre-Wet to soak them before the fan starts; a mild smell from new pads is normal and clears quickly, Brivis says.

How to change the 81012818 evaporative cooler pad kit

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Brivis says its coolers must be maintained only by an authorised person, and recommends an authorised Brivis service technician: book one through Rinnai's Brivis service line. Before any work, switch the cooler off at the wall control and at its power isolating switch.
  2. 2The cooler must have safe and reasonable access, Brivis says; some installations need two service people. Do not go onto the roof without safe access.
  3. 3Check the old pads: Brivis says pads deteriorate over time and lose their ability to soak up water, so replace them when the material has holes or has broken down.
  4. 4Fit the new pad set in place of the old pads, then clean and flush the pads with water.
  5. 5With the pads in position, switch the isolating switch back on and run the cooler. Check the pump runs and the pads wet evenly; a mild smell from new pads is normal and clears quickly.
Every number this part goes by
Retail name:
81012818

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 18 Brivis models

AD11, AD12, AD13, AD14, AD21, AD31, AD32. Brivis's parts list shows only the single 750 x 480 x 75 mm pad (81012518) for this model; this set is four of that pad, and Australian sellers list it for this model.

Common questions
What does the 81012818 fit?
The Brivis AD pad set 81012818 (4 x 750 x 480 x 75 mm) fits 18 Brivis models, including the AD11, AD12 and AD13. Every one is listed on this page.
Where can I buy the 81012818 in Australia?
We track 1 Australian seller for the 81012818; the lowest listed price when we last checked was A$359.00 at HVAC Shop. Prices are re-checked daily and dated on this page.
How do I fit the 81012818?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Clogged pads pass less air and water, so the cooler blows warmer air, and old pads can smell musty.
How do I reset the reminder?
No pad reminder to reset. After new pads are fitted, the cooler runs a Pre-Wet to soak them before the fan starts; a mild smell from new pads is normal and clears quickly, Brivis says.

Something looks wrong with the 81012818 match? . Reports go to a person, not a bot.