FitMatch

Fridge water filter · Fisher & Paykel

Fisher & Paykel / Haier 868686 Water Filter

Part code868686
  • Replace every 6 months
  • Fits inside the fridge
  • Fits 8 models
Fisher & Paykel / Haier 868686 Water Filter

Sellers from

$36.95

6 sellers compared

The 868686 (Haier part H0060869187, F&P system FWC5) is the internal cartridge shared by the Fisher & Paykel RF500Q and Haier HRF580 and HRF680 quad door fridges. Both brands sell it for $69.95 and recommend replacing it every six months. Haier's HRF680 guide says to lift the filter cover, turn the old filter a quarter turn anticlockwise, fit the new one and use the panel's filter reset.

Reduces

  • Chlorine
  • Lead
  • Impurities
Fits
Fisher & Paykel RF500Q and Haier HRF580YP / HRF680YP
Interval
We recommend a new filter every six months for optimal water drinkability and flow
Certification
IAPMO certified to filter out chlorine, lead, and impurities
Fitting
Lift open the water filter cover lid, turn the filter counter clockwise a quarter turn to remove, fit the new filter with correct orientation (HRF680YPS/YPC)
Certification (FWC5, F&P guide)
FWC5 certified by IAPMO R&T against NSF/ANSI Standards 42, 53, 401 and P473; rated capacity 102 gallons (386 litres)
Every number this part goes by
Retail name:
FCW5
Part number:
0060869187
Part number:
H0060869187

Where to buy

Every seller we track for this part, cheapest first. Genuine is the manufacturer's own part; compatible is a third-party filter made to fit. Prices are re-checked daily where the seller publishes them. Last checked 7 September 2026.

How long it lasts

Replace every 6 months — the appliance's filter light tells you when.

After fitting: HRF680YPS/YPC control panel has a dedicated Filter Reset selector (key D); the guide does not state a hold time. F&P models: press the two indicated buttons together for 4 seconds.

Flow slows and taste drops off as the filter fills up. Changing on time is the whole point of the filter.

Not due yet?

This filter is due every 6 months. We'll email you when it's time — free, no spam.

Fitting it

A few minutes, no tools. Watch it done, then follow the steps.

How to install your external Fisher & Paykel fridge water filterStatewide Appliance Spares · YouTube
  1. 1Open the fridge door and find the filter housing at the top of the fresh-food compartment; on most models a small cover flips down.
  2. 2Turn the old filter a quarter turn anti-clockwise and pull it straight out. A little water may drip; keep a cloth handy.
  3. 3Take the caps off the new filter, push it into the housing and turn it clockwise until it stops.
  4. 4Run 4 litres of water through the dispenser to flush the carbon, then reset the filter light (hold the filter or reset button for 3 seconds).

Will it fit your appliance?

Type your model number and we'll check it against our fitment database.

Fits these models
Common questions
Which water filter fits the Fisher & Paykel 868686?
The Fisher & Paykel 868686 takes the Fisher & Paykel / Haier 868686 Water Filter (part 868686). Compatible filters made to the same specification also fit.
How often should I replace the water filter in my Fisher & Paykel 868686?
Every 6 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
Where can I buy the 868686 in Australia?
We track 6 Australian sellers for the 868686; the lowest listed price when we last checked was A$36.95 at Water Filter Distributors. Prices are re-checked daily and dated on this page.
How do I fit the 868686 in a Fisher & Paykel 868686?
No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.

Own a 868686 and this looks wrong? . Reports go to a person, not a bot.

Confirmed fit868686 · from $36.95Compare sellers