Whirlpool fridge water filters by part number
1 Whirlpool water filters sold in Australia. Each part page lists the models it fits, how often to change it and what sellers charge.
Whirlpool's own filters are branded everydrop and numbered Filter 1 to Filter 6, with codes such as EDR1RXD1, EDR2RXD1, EDR3RXD1 and EDR6D1; two-packs add a V2P suffix (for example EDR1RXV2P). Whirlpool says to replace the filter every six months or about 750 litres, and fridges with a filter indicator light up at that point. Flush the water system after fitting a new filter.
Source: producthelp.whirlpool.com
The water filters
W10295370AZ interior water filterW10295370AZ · 1 modelfrom $34.00The Whirlpool W10295370AZ is the interior water filter for Whirlpool's plumbed French-door fridges with ice and water, such as the WQ70902TBX. It sits in a compartment at the lower left of the fridge section behind a push-open door and locks with a quarter turn. Whirlpool says the media is NSF 42 and 53 certified for chlorine taste and odour, industrial chemicals, lead and cysts, and to change it every six months or 200 gallons, whichever comes first.
Change it every 6 months; 6 steps, no tools.
After the change: Press the Water Filter Reset button on the door control panel after fitting the new cartridge; the Replace Water Filter indicator goes out (WQ70902TBX manual, controls list).
Fits the WQ70902TBX.
Brand names describe compatibility only; FitMatch is independent of Whirlpool. Fitment sources are recorded on every model page.