Whirlpool fridge water filter
Which water filter each of the 1 Whirlpool fridges sold in Australia takes, with dated prices from 2 Australian sellers, genuine and compatible side by side.
W10295370AZ interior water filtertakes W10295370AZ
How to change your Whirlpool fridge filter
Steps for the W10295370AZ interior water filter (W10295370AZ), the filter 1 Whirlpool model takes. Change it every 6 months.
No clear video for this filter yet. The steps cover it.
- 1Open the fridge doors and find the filter door low on the left-hand side of the fridge compartment. Push on its right side to open it.
- 2Turn the old filter a quarter turn anti-clockwise and pull it straight out. A little water may drip; have a cloth ready.
- 3Line up the arrow on the new filter's cap with the notch in the housing and push it in.
- 4Turn the filter a quarter turn (90 degrees) clockwise until it locks, then push the filter door closed until it latches.
- 5Press Water Filter Reset on the door panel so the Replace Water Filter light goes out.
- 6Run about 11 litres of water through the dispenser to clear air from the line; it may sputter at first.
Turn off the filter light
Press the Water Filter Reset button on the door control panel after fitting the new cartridge; the Replace Water Filter indicator goes out (WQ70902TBX manual, controls list).
Get a reminder when your Whirlpool fridge filter is due
Most Whirlpool models here change it every 6 months. One email two weeks before, no newsletter. Type the model from the sticker and we set the date for that model.
Common questions
- How often should I change a Whirlpool fridge filter?
- Every 6 months for the W10295370AZ interior water filter (W10295370AZ), the filter most Whirlpool models here take. Each model page shows the interval for its own filter.
- What happens if I don't change the filter?
- Flow from the dispenser slows and chlorine taste and odour come back as the carbon saturates; the fridge itself keeps working.
- Does Whirlpool make a compatible filter?
- Whirlpool makes the genuine filter. Compatible filters for Whirlpool models are made by other companies to the same shape and flow rate, and Australian sellers we track list both; each part page shows the genuine and compatible prices side by side and the certifications we could confirm.
- How do I reset the filter light on a Whirlpool fridge?
- Press the Water Filter Reset button on the door control panel after fitting the new cartridge; the Replace Water Filter indicator goes out (WQ70902TBX manual, controls list).
Brand names describe compatibility only; FitMatch is independent of Whirlpool. Fitment sources are recorded on every model page.
