Ionmax dehumidifier filters by part number

Washable foam inlet filters for the Ionmax+ EcorPro DryFan desiccant dehumidifiers DF8, DF12, DF8PRO and DF12PRO, sold as a set of three. The filter keeps dust off the drying rotor, so check it now and then, vacuum it or hand-wash it in mild detergent, and fit a new one when it is worn. Never run the unit without a filter.

After the change: No reset needed on the DF12, DF12PRO, DF8 and DF8PRO: no filter reminder to clear.

Fits 4 Ionmax models: DF12, DF12PRO, DF8, DF8PRO.

Ionmax's optional HEPA (H11) filter for the Ionmax+ ED18 industrial desiccant dehumidifier. It sits behind the antibacterial pre-filter under the air inlet and filter cover. Ionmax says to replace it after 6 months of use, or sooner if the air is heavily polluted. Check and clean the pre-filter about every 2 months.

Change it every 6 months; 4 steps, no tools.

After the change: No reset needed on the ED18: no filter reminder to clear.

Fits the ED18.

Ionmax's replacement antibacterial dust filter for the ION610 desiccant dehumidifier. Ionmax says to vacuum it every 2 weeks with a smooth brush attachment and not to wash it; it gives no fixed replacement time, so change it if it is damaged or won't come clean. Don't run the unit without it.

After the change: No reset needed on the ION610: no filter reminder to clear. If the CHECK light is on, clean the filter, unplug and wait 10 minutes before restarting.

Fits the ION610.

Ionmax's replacement air filter for the ION612 desiccant dehumidifier. It sits at the back of the unit and keeps dust out of the machine. Ionmax says to check it and vacuum it every 2 weeks; it gives no fixed replacement time, so change it if it is torn or won't come clean. Never run the dehumidifier without it.

After the change: No reset needed on the ION612: no filter reminder to clear.

Fits the ION612.

Ionmax's HEPA H13 filter for the Venta ION615 desiccant dehumidifier. It sits in the filter compartment at the back. Ionmax says to change it every 6 to 12 months; the filter icon lights up after 2,160 hours. Between changes, vacuum it every 2 weeks if the unit is used often.

Change it every 6 months; 5 steps, no tools.

Fits the ION615.

Ionmax's HEPA H13 filter for the Leone Pro ION626 compressor dehumidifier, which lets it clean the air as it dries it. Ionmax says to change it every 6 to 12 months; the filter reminder comes on after 2,160 hours. Clean the washable pre-filter every 2 weeks and let it dry fully before refitting.

Change it every 6 months; 4 steps, no tools.

After the change: After changing the filter, hold the Timer button for 5 seconds to reset the reminder.

Fits the ION626.

An optional carbon and HEPA filter for the Ionmax Vienne ION630 desiccant dehumidifier. It fits behind the standard pre-filter under the back cover and adds odour and fine-particle filtering. Ionmax says to replace it every 6 months. Keep cleaning the pre-filter at least once a month.

Change it every 6 months; 4 steps, no tools.

After the change: No reset needed on the ION630: no filter reminder to clear.

Fits the ION630.

Ionmax's replacement air filter for the ION632 desiccant dehumidifier. It sits at the back of the unit and keeps dust out of the machine. Ionmax says to check it and vacuum it every 2 weeks; it gives no fixed replacement time, so change it if it is torn or won't come clean. Never run the dehumidifier without it.

After the change: No reset needed on the ION632: no filter reminder to clear.

Fits the ION632.

Ionmax's HEPA H13 filter for the Rhine Pro ION651 compressor dehumidifier. It lets the Rhine Pro clean the air while it dries it. Ionmax says to change it every 6 to 12 months; the filter icon flashes after about 1,500 hours. The washable pre-filter at the back is cleaned, not replaced: vacuum or rinse it every 2 weeks.

Change it every 6 months; 5 steps, no tools.

After the change: While the filter icon is flashing and the unit is running, hold the Timer button for 5 seconds until it beeps.

Fits the ION651.

Ionmax's optional deodorising HEPA (H11) filter for the Ionmax+ ED18 industrial desiccant dehumidifier. It sits behind the antibacterial pre-filter under the air inlet and filter cover. Ionmax says to replace it after 6 months of use, or sooner if the air is heavily polluted. Check and clean the pre-filter about every 2 months.

Change it every 6 months; 4 steps, no tools.

After the change: No reset needed on the ED18: no filter reminder to clear.

Fits the ED18.