Rowenta steam iron anti-scale cartridges
Which anti-scale cartridge each of the 2 Rowenta steam irons and steamers sold in Australia takes, with dated prices from 1 Australian seller.
Showing 2 of 2 Rowenta models · grouped by part
Tefal Fasteo anti-calc cartridgetakes XD9060E0
How to change the anti-scale cartridge in your Rowenta steam iron
Steps for the Tefal Fasteo anti-calc cartridge (XD9060E0), the anti-scale cartridge 2 Rowenta models take.
- 1Never change the cartridge while ironing. Switch off, unplug and wait at least one hour until the appliance is cold.
- 2Fasteo: open the anti-calc cartridge cover under the iron rest on the base and pull the used cartridge out. A few drops of water may come out; this is normal.
- 3Take the new cartridge out of its bag just before fitting it and remove its cap. Push it into the compartment until it locks, then close the cover.
- 4Plug in and switch on. When the appliance is ready (about 2 minutes), hold the anti-calc reset button on the control panel for 3 seconds.
- 5If no steam comes, press the steam button for a few minutes, away from your clothes, to restart the water circuit.
Reset the cartridge light
After fitting the new cartridge and letting the appliance heat up, hold the anti-calc reset button on the control panel for 3 seconds. Tefal says to press it only when you have changed the cartridge.
Common questions
- What happens if I don't change the anti-scale cartridge?
- A spent cartridge stops taking the scale out: scale builds up in the boiler, the steam weakens and white flakes can come out of the soleplate.
- How do I reset the cartridge light on a Rowenta steam iron?
- After fitting the new cartridge and letting the appliance heat up, hold the anti-calc reset button on the control panel for 3 seconds. Tefal says to press it only when you have changed the cartridge.
All 2 Rowenta steam generators we list, A to Z
Brand names describe compatibility only; FitMatch is independent of Rowenta. Fitment sources are recorded on every model page.