Lawn mower blade
Honda blade kit 4x 21" 06725-VJ9-W80
06725-VJ9-W80
Fits 4 models
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Honda
$50.95
Sun City Motorcycles · 28 OctLowest genuine · Sun City Motorcycles · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Honda. Compatible: another brand.Genuine is made by Honda. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $50.95
Sun City Motorcycles. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Sun City Motorcycles in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when a blade is worn, bent, cracked or damaged, as a set, Honda says; inspect the blades for damage, cracks and rust, and have a dull blade sharpened.
After replacing: No reset needed.
How to change the 06725-VJ9-W80 blade
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Stop the engine, turn the fuel valve off and disconnect the spark plug cap from the spark plug. Wear thick leather gloves.
- 2Tilt the mower onto its right side so the fuel cap side is up; Honda says this helps prevent fuel leaks and carburettor flooding.
- 3Hold the blades so they cannot turn and remove the blade bolts, then take off the old swing-back blades.
- 4Clean grass and dirt from around the blade disc and check the disc for damage; replace it if a blade has hit something hard.
- 5Fit the new blades as a set with the blade-setting bolts, washers and lock nuts shown in Honda's parts diagram (Honda says to use only Honda genuine bolts and washers), and tighten them firmly. If you do not have a torque wrench, Honda says to have a Honda dealer tighten the blade bolts.
Every number this part goes by
- Retail name:
- 06725-VJ9-W80
- Retail name:
- 06725VJ9W80
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits these 4 Honda models
HRU216. Takes 4 swing-back blades (2 hi-lift, 2 lo-lift): the 4-blade kit 06725-VJ9-W80 replaces all four; Honda also sells the hi-lift and lo-lift pairs.
HRU216M. Honda lists the 4-blade kit 06725-VJ9-W80, the hi-lift pair 06725-VJ9-B80 and the lo-lift pair 06720-VJ9-A00 for the HRU216M.
The other 2 models. Takes 4 swing-back blades: the 4-blade kit 06725-VJ9-W80 replaces all four; Honda also sells the hi-lift and lo-lift pairs.
Common questions
- What does the 06725-VJ9-W80 fit?
- The Honda blade kit 4x 21" 06725-VJ9-W80 fits 4 Honda models, including the HRU21, HRU216 and HRU216M. Every one is listed on this page.
- Where can I buy the 06725-VJ9-W80 in Australia?
- We track 1 Australian seller for the 06725-VJ9-W80; the lowest listed price when we last checked was A$50.95 at Sun City Motorcycles. Prices are re-checked daily and dated on this page.
- How do I fit the 06725-VJ9-W80?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.
- Is there anything to reset afterwards?
- No reset needed.
Something looks wrong with the 06725-VJ9-W80 match? . Reports go to a person, not a bot.