Lawn mower blade
Honda blade kit 2x 19" M1 06725-VK0-W80
06725-VK0-W80
Fits 6 models
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Honda
$26.30
Sun City Motorcycles · 28 OctLowest genuine · Sun City Motorcycles · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Honda. Compatible: another brand.Genuine is made by Honda. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $26.30
Sun City Motorcycles. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Sun City Motorcycles in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when a blade is worn, bent, cracked or damaged, as a set, Honda says; inspect the blades for damage, cracks and rust, and have a dull blade sharpened.
After replacing: No reset needed.
How to change the 06725-VK0-W80 blade
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Stop the engine, turn the fuel valve off and disconnect the spark plug cap from the spark plug. Wear thick leather gloves.
- 2Tilt the mower onto its right side so the fuel cap side is up; Honda says this helps prevent fuel leaks and carburettor flooding.
- 3Hold the blades so they cannot turn and remove the blade bolts, then take off the old swing-back blades.
- 4Clean grass and dirt from around the blade disc and check the disc for damage; replace it if a blade has hit something hard.
- 5Fit the new blades as a set with the blade-setting bolts, washers and lock nuts shown in Honda's parts diagram (Honda says to use only Honda genuine bolts and washers), and tighten them firmly. If you do not have a torque wrench, Honda says to have a Honda dealer tighten the blade bolts.
Every number this part goes by
- Retail name:
- 06725-VK0-W80
- Retail name:
- 06725VK0W80
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits these 6 Honda models
HRU196K. Honda lists blade kit 06725-VK0-W80 (2 blades) for the HRU196K; its disc takes two kits.
HRU196M. Honda lists blade kit 06725-VK0-W80 (2 blades, two kits per disc); one HRU196M version takes the 4-blade kit 06720-VK0-600 instead.
HRU197K. Honda lists blade kit 06725-VK0-W80 (2 blades, two kits per disc) and also the 19" hi-lift, lo-lift and 4-blade kits for the HRU197K.
HRU197M. Honda lists blade kit 06725-VK0-W80 (2 blades, two kits per disc) and also the 19" hi-lift, lo-lift and 4-blade kits for the HRU197M.
HRU19K. Honda lists blade kit 06725-VK0-W80 (2 blades) for the HRU19K; its disc takes two kits.
HRU19M. Honda lists blade kit 06725-VK0-W80 (2 blades, two kits per disc); some HRU19M versions take the hi-lift pair 06720-VA3-K80 instead.
Common questions
- What does the 06725-VK0-W80 fit?
- The Honda blade kit 2x 19" M1 06725-VK0-W80 fits 6 Honda models, including the HRU196K, HRU196M and HRU197K. Every one is listed on this page.
- Where can I buy the 06725-VK0-W80 in Australia?
- We track 1 Australian seller for the 06725-VK0-W80; the lowest listed price when we last checked was A$26.30 at Sun City Motorcycles. Prices are re-checked daily and dated on this page.
- How do I fit the 06725-VK0-W80?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.
- Is there anything to reset afterwards?
- No reset needed.
Something looks wrong with the 06725-VK0-W80 match? . Reports go to a person, not a bot.