How do I fit the PXLMB-300?

5 steps, listed on this page with the replacement video where the maker has one.

What happens if I don't change it?

A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.

Lawn mower blade

Ozito PXC 300mm lawn mower blade PXLMB-300

PXLMB-300

Fits 1 model · replace every 2 years

Wrong part, or your model missing? Tell us. A person checks every report.

GenuineGenuine Ozito

See seller

Bunnings · 28 OctBunnings · checked 28 Oct

CompatibleCompatible option

See seller

No compatible seller tracked yetNo compatible seller tracked yet

Genuine: made by Ozito. Compatible: another brand.Genuine is made by Ozito. Compatible is made by another brand. Check the seller's page for the size and models it fits.

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Genuine Ozito

1 seller

BunningsGenuine · no price recordedGenuine partno price recordedSee priceOpenGo to seller

How long it lasts

Usually every 2 years (after 50 hours of mowing or 2 years, whichever is sooner, and straight away if it is cracked or damaged, Ozito says).

After replacing: No reset needed.

Not due yet?

Get a nudge when your blade is due — it's every 2 years. One email two weeks before, no newsletter. Manage or stop it anytime.

How to change the PXLMB-300 blade

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

1Make sure the blade has stopped, then remove the safety key, the batteries and the grass catcher. Wear gloves: the edges are sharp.
2Turn the mower over. Hold the blade firmly (a piece of timber helps) and loosen the blade bolt anticlockwise with a 13 mm socket.
3Remove the blade bolt, washer and blade.
4Place the new blade over the centre hole, lining up the lugs (on some models the lugs are shaped so the blade only fits one way).
5Refit the washer and bolt and tighten to about 25 Nm.

Every number this part goes byPXLMB-300 · PXLMB300

Retail name:: PXLMB-300
Retail name:: PXLMB300

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Your appliance model

Fits this Ozito modelPXCLMS-018

Ozito1 model

PXCLMS-018

One 300 mm bar blade (PXLMB-300). Ozito says to replace it after 50 hours of mowing or 2 years.

Common questionsWhat does the PXLMB-300 fit? · How often should I replace the PXLMB-300? · Where can I buy the PXLMB-300 in Australia?

What does the PXLMB-300 fit?: The Ozito PXC 300mm lawn mower blade PXLMB-300 fits the Ozito PXCLMS-018.
How often should I replace the PXLMB-300?: Every 2 years, or sooner if it looks worn.
Where can I buy the PXLMB-300 in Australia?: We link to 1 Australian seller for the PXLMB-300; the seller's page shows the current price.
How do I fit the PXLMB-300?: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?: A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.
Is there anything to reset afterwards?: No reset needed.

Something looks wrong with the PXLMB-300 match? . Reports go to a person, not a bot.