FitMatch
RYOBI 46cm lawn mower blade RAC4005

Lawn mower blade

RYOBI 46cm lawn mower blade RAC4005

RAC4005

Fits 2 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

See seller

Ryobi Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Ryobi. Compatible: another brand.

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

How long it lasts

Replace it when it is bent, worn or damaged, Ryobi says; inspect it before each use, and sharpen or replace a dull blade.

After replacing: No reset needed.

How to change the RAC4005 blade

Watch the guide or follow the steps.

How To: Replace a RYOBI Mower Blade · RYOBI TOOLS USA (official)
  1. 1Open the battery door, take out the battery pack(s) and remove the isolator key (safety key), then close the battery door. Wear heavy-duty gloves: the blade is sharp.
  2. 2Remove the grass catcher and tilt the mower on its side. Clear grass clippings and debris from the deck and blade.
  3. 3Put a piece of wood in the deck to stop the blade turning and loosen the blade nut. Remove the nut, spacer and washer, then the old blade.
  4. 4Fit the new blade, washer, spacer and nut, making sure the posts on the hub line up with the holes in the blade.
  5. 5With the wood holding the blade, hand-tighten the nut until the blade is secure, then tighten it to 35-40 Nm (about half a turn with a spanner).
Every number this part goes by
Retail name:
RAC4005

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 2 Ryobi models

Ryobi2 models

R36LMW30. Takes the RAC4005 blade. Blade bolt torque 35-40 Nm.

RLM36BL. One 46 cm bar blade (RAC4005).

Common questions
What does the RAC4005 fit?
The RYOBI 46cm lawn mower blade RAC4005 fits the Ryobi R36LMW30 and RLM36BL.
Where can I buy the RAC4005 in Australia?
We link to 2 Australian sellers for the RAC4005; the seller's page shows the current price.
How do I fit the RAC4005?
5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.
Is there anything to reset afterwards?
No reset needed.

Something looks wrong with the RAC4005 match? . Reports go to a person, not a bot.