FitMatch
Ozito PXC 2.0 mm x 8.0 m bump spool and line PXSLA-001

Line trimmer spool

Ozito PXC 2.0 mm x 8.0 m bump spool and line PXSLA-001

PXSLA-001

Fits 1 model

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

See seller

No genuine seller tracked yet

Compatible

$6.00 each

3-pack $17.99

Amazon AU · 28 Oct

Check seller

Genuine: made by Ozito. Compatible: another brand.

Lowest compatible · $6.00 each · 3-pack $17.99

Amazon AU. Compare with genuine below. Some links earn us a commission.

Open Amazon AU

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $6.00 each · 3-pack $17.99

Opens Amazon AU in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when the line runs out; tap the head on the ground to feed more line until then.

After replacing: No reset needed.

How to change the PXSLA-001 spool

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Turn the trimmer off and remove both batteries.
  2. 2Press the release tabs on the spool cover and pull the cover straight off.
  3. 3Lift the old spool out of the hub and clear any broken line or debris from the spool area.
  4. 4Fit the new spool and thread the line through the eyelet in the spool cover.
  5. 5Snap the spool cover back onto the spool housing.
Every number this part goes by
Retail name:
0287734
Retail name:
PXSLA-001

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits this Ozito model

Ozito1 model

Common questions
What does the PXSLA-001 fit?
The Ozito PXC 2.0 mm x 8.0 m bump spool and line PXSLA-001 fits the Ozito PXCLTS-0182.
Where can I buy the PXSLA-001 in Australia?
We track 1 Australian seller for the PXSLA-001; the lowest listed price when we last checked was A$6.00 at Amazon AU. Prices are re-checked daily and dated on this page.
How do I fit the PXSLA-001?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
The trimmer stops cutting when the line runs out, and line of the wrong diameter jams the head or strains the motor.
Is there anything to reset afterwards?
No reset needed.

Something looks wrong with the PXSLA-001 match? . Reports go to a person, not a bot.