FitMatch

Husqvarna line trimmer spools and parts

Which spool, line or part each of the 2 Husqvarna line trimmers sold in Australia takes, with dated prices from 1 Australian seller.

Showing 2 of 2 Husqvarna models

Spool and line A15B, 3-pack (534 16 21-01)takes 534 16 21-01

How to change the spool in your Husqvarna trimmer

Steps for the spool and line A15B, 3-pack (534 16 21-01) (534 16 21-01), the spool 2 Husqvarna models take.

Husqvarna Aspire™ Battery Grass Trimmer | Replacing The Trimmer Line With Walt Collins · Husqvarna Australia (official)
  1. 1Release the power trigger, switch off with the on/off button and remove the battery.
  2. 2Press the tabs on the A15B head cover and lift off the cover, then take out the old spool.
  3. 3Fit a new pre-wound spool and feed each line end out through its eyelet, leaving about 12.5 cm out.
  4. 4Press the cover back on until it clicks.
  5. 5Clean the head cover each time you fit new line to prevent vibration.

After changing the spool

No reset needed.

Common questions

What happens if I don't change the spool?
The trimmer stops cutting when the line runs out, and line of the wrong diameter jams the head or strains the motor.
Is there anything to reset after changing the spool on a Husqvarna trimmer?
No reset needed.
All 2 Husqvarna line trimmers we list, A to Z

Brand names describe compatibility only; FitMatch is independent of Husqvarna. Fitment sources are recorded on every model page.