Worx line trimmer spools and parts
Which spool, line or part each of the 11 Worx line trimmers sold in Australia takes, with dated prices from 1 Australian seller.
Most take the WA0004 (6 of 11 models), from $5.99. Check yours below.
Showing 11 of 11 Worx models · grouped by part
WA0004 replacement spool and line, 1.65 mm x 3 mtakes WA0004
WA0007 dual-line replacement spool, 1.65 mmtakes WA0007
WA0200 dual spool and line, 2 mm (2 pack)takes WA0200
How to change the spool in your Worx trimmer
Steps for the WA0004 replacement spool and line, 1.65 mm x 3 m (WA0004), the spool 6 Worx models take.
- 1Remove the battery pack.
- 2Press the two tabs on the spool cover and lift the cover off.
- 3Take out the empty spool.
- 4Fit the new spool and feed the line end out through the eyelet.
- 5Refit the spool cover until it clicks. Use only 1.65 mm line in the WG163E.
Different steps for WA0217 line trimmer spool cap cover · Different steps for WA0007 dual-line replacement spool, 1.65 mm · Different steps for WA0200 dual spool and line, 2 mm (2 pack)
After changing the spool
No reset needed.
Common questions
- What happens if I don't change the spool?
- The trimmer stops cutting when the line runs out, and line of the wrong diameter jams the head or strains the motor.
- Is there anything to reset after changing the spool on a Worx trimmer?
- No reset needed.
All 11 Worx line trimmers we list, A to Z
Brand names describe compatibility only; FitMatch is independent of Worx. Fitment sources are recorded on every model page.