Pond filter foam
PondMAX PF14000 pressure filter sponge set
13PF055
Fits 1 model
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine PondMAX
$132.00
The Fish Works · 28 OctLowest genuine · The Fish Works · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by PondMAX. Compatible: another brand.Genuine is made by PondMAX. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $132.00
The Fish Works. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens The Fish Works in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is worn or torn; PondMAX gives no replacement interval and says to clean the sponges about once a month.
How to change the 13PF055 pond filter foam
Watch the guide or follow the steps.
- 1Turn off the pump and unplug the filter's UV-C from the power. PondMAX says to disconnect the power before any maintenance.
- 2Undo the inlet and outlet hosetails, unclip the lid clamp and carefully lift off the lid. Take care not to lose or damage the O-ring seal.
- 3Unscrew the clear locking screw under the sponge layers (the black base plate on the bigger models), undo the screw holding the stainless steel shaft, remove the base plate and slide the foam rings off the centre core.
- 4Fit the new sponge rings onto the centre core, alternating blue and yellow. Rinse any sponges you keep in pond water or dechlorinated water, never tap water: PondMAX says chlorine kills the good bacteria.
- 5Clean out the canister but leave some of the brown sludge on the bio media, refit the lid with its O-ring, fasten the clamp and reconnect the hoses. Turn the pump on, then plug the UV-C back in.
Every number this part goes by
- Retail name:
- 13PF055
- Retail name:
- PF14000 sponge set
- Retail name:
- PondMAX PF14000 sponge set
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits this PondMAX model
PondMAX1 model
Common questions
- What does the 13PF055 fit?
- The PondMAX PF14000 pressure filter sponge set (part 13PF055) fits the PondMAX PF14000UV.
- Where can I buy the 13PF055 in Australia?
- We track 1 Australian seller for the 13PF055; the lowest listed price when we last checked was A$132.00 at The Fish Works. Prices are re-checked daily and dated on this page.
- How do I fit the 13PF055?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A torn or worn-out foam lets dirt through to the pump and the water clouds.
Something looks wrong with the 13PF055 match? . Reports go to a person, not a bot.