FitMatch
Dolphin monoblock fine filter canister 9991461-ASSY

Pool cleaner filter

Dolphin monoblock fine filter canister 9991461-ASSY

9991461-ASSY

Fits 3 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$126.93

Maytronics Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Maytronics. Compatible: another brand.

Lowest price · $126.93

Maytronics Australia. Every seller we track is listed below. Some links earn us a commission.

Open Maytronics Australia

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Maytronics AustraliaGenuine · checked 28 Oct$126.93Open
Open cheapest seller · $126.93

Opens Maytronics Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when the mesh is torn, cracked or worn at the edges, or stays brown or green after a deep clean, Maytronics says; rinse it after every cycle and deep-clean it about once a month.

After replacing: No reset needed. Robots with a filter indicator on the power supply or app clear it after the filter is cleaned and a new cycle starts; the manual for your model has the details.

How to change the 9991461-ASSY pool cleaner filter

Watch the guide or follow the steps.

How to clean your Dolphin robotic cleaner filter basket · Maytronics Australia (official)
  1. 1Switch off and unplug the power supply. Use the floating cable to bring the robot to the edge, then lift it out by its handle (never by the cable) and let the water drain.
  2. 2Open the filter cover; the handle lifts up by itself.
  3. 3Lift out the old net canister or filter basket.
  4. 4Drop the new canister or basket into place and close the filter cover.
Every number this part goes by
Retail name:
9991461
Retail name:
9991461-ASSY
Retail name:
9991461-R1

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 3 Maytronics models

Dolphin E10. The E10 comes with a net filter canister, Maytronics says. Panel baskets fit as an upgrade.

The other 2 models. Monoblock net canister: the single-piece fine filter Maytronics also lists for this model.

Common questions
What does the 9991461-ASSY fit?
The Dolphin monoblock fine filter canister 9991461-ASSY fits the Maytronics Dolphin E10, Dolphin DB1 and Dolphin S50.
Where can I buy the 9991461-ASSY in Australia?
We track 1 Australian seller for the 9991461-ASSY; the lowest listed price when we last checked was A$126.93 at Maytronics Australia. Prices are re-checked daily and dated on this page.
How do I fit the 9991461-ASSY?
No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A clogged filter slows the cleaner and it picks up less; a torn one lets fine dirt pass straight back into the water.
Is there anything to reset afterwards?
No reset needed. Robots with a filter indicator on the power supply or app clear it after the filter is cleaned and a new cycle starts; the manual for your model has the details.

Something looks wrong with the 9991461-ASSY match? . Reports go to a person, not a bot.