FitMatch
Dolphin fine filter panels 9991463-ASSY (set of 4)

Pool cleaner filter

Dolphin fine filter panels 9991463-ASSY (set of 4)

9991463-ASSY

Fits 11 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$140.34

Maytronics Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Maytronics. Compatible: another brand.

Lowest price · $140.34

Maytronics Australia. Every seller we track is listed below. Some links earn us a commission.

Open Maytronics Australia

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

Maytronics AustraliaGenuine · checked 28 Oct$140.34Open
Amazon AUGenuine · no price recordedSee priceOpen
Open cheapest seller · $140.34

Opens Maytronics Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when the mesh is torn, cracked or worn at the edges, or stays brown or green after a deep clean, Maytronics says; rinse it after every cycle and deep-clean it about once a month.

After replacing: No reset needed. Robots with a filter indicator on the power supply or app clear it after the filter is cleaned and a new cycle starts; the manual for your model has the details.

How to change the 9991463-ASSY pool cleaner filter

Watch the guide or follow the steps.

How to swap your Dolphin robotic pool cleaner fine filter panels to ultra-fine filter panels · Maytronics Australia (official)
  1. 1Switch off and unplug the power supply. Use the floating cable to bring the robot to the edge, then lift it out by its handle (never by the cable) and let the water drain. On the cordless Liberty 600, take the robot out of the pool and switch it off first.
  2. 2Open the filter cover; the handle lifts up by itself. Lift out the filter basket and open the latch to release the bottom lid and empty the debris.
  3. 3Hold the basket handle and lift out the inner net basket.
  4. 4Press out the 4 panels in order, starting with panel 1, then 2, 3 and 4.
  5. 5Fit the new panels in reverse order: 4, 3, 2, then 1. Do not force them into place.
  6. 6Refit the inner net basket, put the basket back and close the filter cover.
Every number this part goes by
Retail name:
9991463
Retail name:
9991463-ASSY
Retail name:
9991463-R4

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 11 Maytronics models

Dolphin Active X6. Maytronics names the X6 for these fine panels and the rough insert, but not for the ultra-fine panels.

Common questions
What does the 9991463-ASSY fit?
The Dolphin fine filter panels 9991463-ASSY (set of 4) fits 11 Maytronics models, including the Dolphin Active X6, Dolphin Liberty 600 and Dolphin M550. Every one is listed on this page.
Where can I buy the 9991463-ASSY in Australia?
We track 2 Australian sellers for the 9991463-ASSY; the lowest listed price when we last checked was A$140.34 at Maytronics Australia. Prices are re-checked daily and dated on this page.
How do I fit the 9991463-ASSY?
No tools, a few minutes: 6 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A clogged filter slows the cleaner and it picks up less; a torn one lets fine dirt pass straight back into the water.
Is there anything to reset afterwards?
No reset needed. Robots with a filter indicator on the power supply or app clear it after the filter is cleaned and a new cycle starts; the manual for your model has the details.

Something looks wrong with the 9991463-ASSY match? . Reports go to a person, not a bot.