Pool filter cartridge
Pentair FreeFlo FFCF200 cartridge element 800753
800753
Fits 1 model
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Pentair
See seller
No genuine seller tracked yetNo genuine seller tracked yet
CompatibleCompatible option
$186.00
Heater and Spa Parts · 28 OctHeater and Spa Parts · checked 28 Oct
Check sellerCheck seller details
Genuine: made by Pentair. Compatible: another brand.Genuine is made by Pentair. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $186.00
Heater and Spa Parts. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Opens Heater and Spa Parts in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when cleaning no longer brings the pressure back to the clean reading; clean it at 50–70 kPa above that reading.
After replacing: No reset light. Pentair says to clean the cartridge when the gauge reads 50–70 kPa above the clean-filter reading.
How to change the 800753 pool filter cartridge
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Switch off the pump and close the valves on the suction and return lines.
- 2Open the air bleed valve on the lid, unscrew the lock ring and take off the lid.
- 3Lift out the cartridge (the genuine kit is two stacked elements; a compatible one is a single long element) and hose the pleats, or fit a new one.
- 4Locate the cartridge and centre pipe on the bottom spigot. Clean and lubricate the lid O-ring.
- 5Press the lid down and screw the lock ring hand tight. Open the valves, start the pump and close the air bleed once all air is out.
Every number this part goes by
- Retail name:
- 800753
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits this Pentair model
Pentair1 model
Pentair's 800753 is a kit of two stacked elements. The compatible listings are one full-length element that replaces both.
Common questions
- What does the 800753 fit?
- The Pentair FreeFlo FFCF200 cartridge element 800753 fits the Pentair FFCF200.
- Where can I buy the 800753 in Australia?
- We track 2 Australian sellers for the 800753; the lowest listed price when we last checked was A$186.00 at Heater and Spa Parts. Prices are re-checked daily and dated on this page.
- How do I fit the 800753?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A clogged cartridge slows the flow and the pump works harder, and a torn one lets dirt back into the water, so the pool or spa clouds.
- Is there anything to reset afterwards?
- No reset light. Pentair says to clean the cartridge when the gauge reads 50–70 kPa above the clean-filter reading.
Something looks wrong with the 800753 match? . Reports go to a person, not a bot.