How often should I change an Alpine Spas cartridge?

Every 6 months for the Platinum Microban filter (265 x 125 mm) (FILTER-PLAT-1PC), the most common Alpine Spas filter here. Each model page shows the interval for its own filter.

What happens if I don't change the filter?

A clogged cartridge slows the flow and the pump works harder, and a torn one lets dirt back into the water, so the pool or spa clouds.

Alpine Spas filter cartridges

Which replacement cartridge each of the 43 Alpine Spas sold in Australia takes, with dated prices from 1 Australian seller.

Most take the FILTER-PLAT-1PC (22 of 43 models), from $74.99. Check yours below.

Genuine · Spa Supplies$74.99 All 1 sellers

Showing 21 of 43 Alpine Spas models · grouped by part

Platinum Microban filter (265 x 125 mm)takes FILTER-PLAT-1PC

Loading more models…

How to change your Alpine Spas filter cartridge

Steps for the Platinum Microban filter (265 x 125 mm) (FILTER-PLAT-1PC), the filter 22 Alpine Spas models take. Change it every 6 months.

How do I keep the water in my spa pool clean? · Alpine Spas™ - New Zealand & Australia (official)

1Switch the spa off at the isolating switch or mains board.
2Undo the plastic screw on the cup holder and lift the cup holder off the skimmer lid.
3Press down on the skimmer lid and twist it anticlockwise to remove it (it can be stiff), then lift out the basket grill.
4Lift the filter off the round holder, hose it clean or fit a new one, and push it back over the holder so it sits tight.
5Fit the basket grill into the top of the filter, turn the lid clockwise until it snaps into place, refit the cup holder and switch the spa pool back on.

Different steps for Standard Microban filter, pair (168 x 148 mm) · Different steps for Alpine Tubs Microban filter for Milford and Tekapo (336 x 126 mm)

After fitting the new cartridge

The Alpine Spas manual describes no filter reminder; follow its cleaning schedule.

Get a reminder when your Alpine Spas cartridge is due

Most Alpine Spas models here change it every 6 months. One email two weeks before, no newsletter. Type the model from the sticker and we set the date for that model.

Common questions

How often should I change an Alpine Spas cartridge?: Every 6 months for the Platinum Microban filter (265 x 125 mm) (FILTER-PLAT-1PC), the most common Alpine Spas filter here. Each model page shows the interval for its own filter.
What happens if I don't change the filter?: A clogged cartridge slows the flow and the pump works harder, and a torn one lets dirt back into the water, so the pool or spa clouds.
What do I do after changing the cartridge in an Alpine spa?: The Alpine Spas manual describes no filter reminder; follow its cleaning schedule.

All 43 Alpine Spas we list, A to Z

Brand names describe compatibility only; FitMatch is independent of Alpine Spas. Fitment sources are recorded on every model page.