Pressure cooker sealing ring
Breville Fast Slow seal lid (silicone lid seal)
SP0008961
Fits 2 models
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Breville
$8.95
Breville Australia · 31 OctLowest genuine · Breville Australia · checked 31 Oct
We list the maker's own sealing rings only: Instant Brands, Fissler and Ninja warn that other rings may not seal safely.
Lowest price · $8.95
Breville Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Breville Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is cracked or damaged, Breville says; the seal must be clean and free of cracks for the cooker to build pressure.
After replacing: No reset: the maker's manual describes no ring reminder.
How to change the SP0008961 sealing ring
Watch the guide or follow the steps.
- 1Unplug the cooker, let it cool and open the lid.
- 2Unscrew the sealing nut from the centre of the lid and pull the lid away from the lid arm.
- 3Take the old silicone lid seal off the wire ring on the underside of the lid.
- 4Fit the new seal securely around the wire ring and adjust it so it sits evenly with no twists.
- 5Refit the lid with the steam release valve housing to the rear, line it up with the bolt on the lid arm and screw on the sealing nut until the red seal touches the lid.
Every number this part goes by
- Retail name:
- Breville BPR680 lid seal
- Retail name:
- Breville BPR700 lid seal
- Retail name:
- Breville Fast Slow seal lid
- Retail name:
- Fast Slow Pro seal
- Retail name:
- SP0008961
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Common questions
- What does the SP0008961 fit?
- The Breville Fast Slow seal lid (silicone lid seal) (part SP0008961) fits the Breville BPR680 and BPR700.
- Where can I buy the SP0008961 in Australia?
- We track 1 Australian seller for the SP0008961; the lowest listed price when we last checked was A$8.95 at Breville Australia. Prices are re-checked daily and dated on this page.
- How do I fit the SP0008961?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A worn ring lets steam leak around the lid, so the cooker is slow to reach pressure or will not seal at all.
- Is there anything to reset afterwards?
- No reset: the maker's manual describes no ring reminder.
Something looks wrong with the SP0008961 match? . Reports go to a person, not a bot.