How do I fit the X1010006?

No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.

What happens if I don't change it?

A worn ring lets steam leak around the lid, so the cooker is slow to reach pressure or will not seal at all.

Pressure cooker sealing ring

Tefal Clipso Essential seal, 6 and 9 L

X1010006

Fits 2 models · replace every 12 months

Wrong part, or your model missing? Tell us. A person checks every report.

GenuineGenuine Tefal

$33.99

Tefal Australia · 31 OctLowest genuine · Tefal Australia · checked 31 Oct

We list the maker's own sealing rings only: Instant Brands, Fissler and Ninja warn that other rings may not seal safely.

Lowest price · $33.99

Tefal Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.

Open Tefal Australia · $33.99

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Genuine Tefal

1 seller

Tefal AustraliaGenuine · checked 31 OctGenuine part · Lowest genuinechecked 31 Oct$33.99OpenGo to seller

Open cheapest seller · $33.99

Opens Tefal Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Usually every 12 months (every year, Tefal says; straight away if it is split or cracked).

After replacing: No reset: the maker's manual describes no ring reminder.

Not due yet?

Get a nudge when your sealing ring is due — it's every 12 months. One email two weeks before, no newsletter. Manage or stop it anytime.

How to change the X1010006 sealing ring

Watch the guide or follow the steps.

How to change the gasket of your pressure cooker? | Tefal · Tefal International (official)

1Let the cooker cool, make sure there is no pressure left and open the lid.
2Turn the lid upside down and pull the old seal out of its groove.
3Clean the groove with a sponge and washing-up liquid.
4Fit the new seal under the lid. On Secure models make sure it sits under each notch; on Clipso, Acticook and Nutricook models put the side marked 'lid side' against the lid and clip it evenly under the holding device.
5Close the lid and check it locks. If steam escapes round the lid, check the seal is seated evenly.

Every number this part goes byTefal Clipso Essential seal · X1010006

Retail name:: Tefal Clipso Essential seal
Retail name:: X1010006

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Your appliance model

Fits these 2 Tefal modelsClipso Essential 6L, Clipso Essential 9L

Tefal2 models

Common questionsWhat does the X1010006 fit? · How often should I replace the X1010006? · Where can I buy the X1010006 in Australia?

What does the X1010006 fit?: The Tefal Clipso Essential seal, 6 and 9 L (part X1010006) fits the Tefal Clipso Essential 6L and Clipso Essential 9L.
How often should I replace the X1010006?: Every 12 months, or sooner if it looks worn.
Where can I buy the X1010006 in Australia?: We track 1 Australian seller for the X1010006; the lowest listed price when we last checked was A$33.99 at Tefal Australia. Prices are re-checked daily and dated on this page.
How do I fit the X1010006?: No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?: A worn ring lets steam leak around the lid, so the cooker is slow to reach pressure or will not seal at all.
Is there anything to reset afterwards?: No reset: the maker's manual describes no ring reminder.

Something looks wrong with the X1010006 match? . Reports go to a person, not a bot.