FitMatch
Bosch metal grease filter 11062822 (378 x 265 x 8 mm)

Rangehood grease filter

Bosch metal grease filter 11062822 (378 x 265 x 8 mm)

11062822

Fits 5 models

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$37.70

Bosch Australia · 6 Nov

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Bosch. Compatible: another brand.

Lowest price · $37.70

Bosch Australia. Every seller we track is listed below. Some links earn us a commission.

Open Bosch Australia

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $37.70

Opens Bosch Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it only if it is damaged; clean it about every two months.

After replacing: Hoods with a saturation indicator remind you to clean the grease filters. After cleaning, reset it: on many models switch the hood off, then press and hold the indicator button for about three seconds (see "Resetting the saturation indicator" in your manual).

How to change the 11062822 grease filter

Watch the guide or follow the steps.

Bosch Rangehood - Replacing Stainless Steel Filters · Bosch Home Australia and New Zealand (official)
  1. 1Switch the hood off and let it cool. Integrated design hoods (DBB, LJ, D99X): open the glass front fully. Slide-outs (DFS, DFM): pull the visor out. DLN hoods: pull the filter cover down slowly.
  2. 2Hold the grease filter from below with one hand so it cannot drop onto the cooktop, open the lock and tilt it down, then lift it out of its holders. Keep it level so grease does not drip.
  3. 3Soak it in hot soapy water and brush it clean, or put it loosely in the dishwasher on a programme of no more than 70 °C. Do not squeeze it.
  4. 4Rinse and let it drain. Light discolouration after the dishwasher is normal.
  5. 5Hook the filter back into its holders, fold it up and check the lock clicks. If it is torn or bent, fit a new one the same way. Reset the saturation indicator if your hood has one.
Every number this part goes by
Retail name:
11062822

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 5 Bosch models
Common questions
What does the 11062822 fit?
The Bosch metal grease filter 11062822 (378 x 265 x 8 mm) fits 5 Bosch models, including the DWB96BC60A, DWP65BC51A and DWP66BC50A. Every one is listed on this page.
Where can I buy the 11062822 in Australia?
We track 1 Australian seller for the 11062822; the lowest listed price when we last checked was A$37.70 at Bosch Australia. Prices are re-checked daily and dated on this page.
How do I fit the 11062822?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Grease builds up in the mesh and the fan pulls less air, so smoke and smells linger; a recirculating hood with a spent carbon filter blows the smell back into the kitchen.
How do I reset the filter light?
Hoods with a saturation indicator remind you to clean the grease filters. After cleaning, reset it: on many models switch the hood off, then press and hold the indicator button for about three seconds (see "Resetting the saturation indicator" in your manual).

Something looks wrong with the 11062822 match? . Reports go to a person, not a bot.