Dreame robot vacuum filters, brushes and mop cloths by part number

Round rotating mop pads for Dreame's L and X series — L10, L10s, L20, L30, L40, L40s, X40 / X50 / X60 Ultra, Matrix10 Ultra and D20 Pro Plus. They peel off the spinning discs; the dock washes them but they still wear, so swap them when they go thin or stop drying evenly.

Change it every 6 months; 4 steps, no tools.

Fits 17 Dreame models: D20 Pro Plus, L10 Prime, L10s Plus, L10s Pro Ultra Heat, L10s Ultra, L20 Ultra, L30 Ultra S, L40 Plus, L40 Ultra VE, L40s Pro Ultra, L40s Ultra, L50 Ultra and 5 more.

The 3 L dust bag Dreame lists for the Aqua10 / Aqua20, Matrix10 Ultra, L10s Pro Ultra Heat, X40 / X50 / X60 Ultra, L40s Ultra, L40s Pro Ultra, L30 Ultra S and L60 Ultra docks. Dreame warns it does not fit the D20 Pro Plus, F10, F20 or L40 Plus.

Change it every 2 months; 3 steps, no tools.

After the change: The dock detects a new bag; no reset needed.

Fits 13 Dreame models: Aqua10 Roller, Aqua10 Roller AE, Aqua10 Ultra Roller, Aqua10 Ultra Track S, L10s Pro Ultra Heat, L30 Ultra S, L40s Pro Ultra, L40s Ultra, L60 Ultra, Matrix10 Ultra, X40 Ultra, X50 Ultra and 1 more.

The rubber main roller Dreame lists for the L10s Ultra, D10s Plus, L10 Prime, L20 Ultra, X40 Ultra, L30 Ultra S, D9 Max Gen 2 and D10 Plus Gen 2. Cut hair off it monthly; replace when the ribs wear flat or the app timer runs out.

Change it every 12 months; 4 steps, no tools.

After the change: Reset the main-brush timer under Maintenance in the Dreame app.

Fits 8 Dreame models: D10 Plus Gen 2, D10s Plus, D9 Max Gen 2, L10 Prime, L10s Ultra, L20 Ultra, L30 Ultra S, X40 Ultra.

The extendable side brush for the Aqua10 family, X40 Ultra, X50 Ultra, L40s Ultra and L40s Pro Ultra. Dreame says it is not shared with older models.

Change it every 3 months; 3 steps, no tools.

After the change: Reset the side-brush timer under Maintenance in the Dreame app.

Fits 8 Dreame models: Aqua10 Roller, Aqua10 Roller AE, Aqua10 Ultra Roller, Aqua10 Ultra Track S, L40s Pro Ultra, L40s Ultra, X40 Ultra, X50 Ultra.

The RHF21 dust-box filter for the newer Dreame flagships: L60 Ultra, Matrix10 Ultra, L50 Ultra, L50s, X50 Ultra and the L40s pair. Sold singly.

Change it every 3 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Dreame app.

Fits 7 Dreame models: L40s Pro Ultra, L40s Ultra, L50 Ultra, L50s Pro Ultra, L60 Ultra, Matrix10 Ultra, X50 Ultra.

The two-piece HyperStream DuoBrush for the Aqua10 and Aqua20 families, L50 Ultra, Matrix10 Ultra and D20 Pro Plus. The split in the middle feeds hair towards the intake so less wraps.

Change it every 12 months; 3 steps, no tools.

After the change: Reset the main-brush timer under Maintenance in the Dreame app.

Fits 7 Dreame models: Aqua10 Roller, Aqua10 Roller AE, Aqua10 Ultra Roller, Aqua10 Ultra Track S, D20 Pro Plus, L50 Ultra, Matrix10 Ultra.

The washable dust-box filter for the Z10 Pro, L10s Ultra, L10s Plus, L10 Prime, D10s Plus and D10 Plus Gen 2. Lift the top lid, pull the bin, and the filter lifts off the back of it. Rinse it fortnightly, let it dry a full day, and replace it when it stays grey.

Change it every 3 months; 4 steps, no tools.

After the change: In the Dreame app open Maintenance, tap Filter and choose Reset after fitting the new one.

Fits 6 Dreame models: D10 Plus Gen 2, D10s Plus, L10 Prime, L10s Plus, L10s Ultra, Z10 Pro.

Side brush Dreame lists for the L40 Ultra VE, L40 Plus, L20 Ultra, L10s Pro Ultra Heat, L10s Plus and L30 Ultra S.

Change it every 3 months; 3 steps, no tools.

After the change: Reset the side-brush timer under Maintenance in the Dreame app.

Fits 6 Dreame models: L10s Plus, L10s Pro Ultra Heat, L20 Ultra, L30 Ultra S, L40 Plus, L40 Ultra VE.

The dust-box filter for the Aqua10 Roller, Aqua10 Ultra Roller and Aqua10 Ultra Track S. Dreame Australia sells it only inside the Aqua10 accessories kit (two filters plus brushes, bags and mop); Robot Specialist sells the filters on their own.

Change it every 3 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Dreame app.

Fits 4 Dreame models: Aqua10 Roller, Aqua10 Roller AE, Aqua10 Ultra Roller, Aqua10 Ultra Track S.

Washable filter Dreame lists for the L40 Ultra VE, L10s Pro Ultra Heat, X40 Ultra and L30 Ultra S.

Change it every 3 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Dreame app.

Fits 4 Dreame models: L10s Pro Ultra Heat, L30 Ultra S, L40 Ultra VE, X40 Ultra.

Side brush for the D9 Max, D9 Max Gen 2 and D10s Plus.

Change it every 3 months; 3 steps, no tools.

After the change: Reset the side-brush timer under Maintenance in the Dreame app.

Fits 3 Dreame models: D10s Plus, D9 Max, D9 Max Gen 2.

Textured mop cloth for the D9, D9 Max and L10 Pro. Velcros to the water-tank plate.

Change it every 6 months; 3 steps, no tools.

Fits 3 Dreame models: D9, D9 Max, L10 Pro.

The 4 L dust bag for the L40 Plus, L10s Plus and D10 Plus Gen 2 auto-empty docks. Dreame rates it at about 65 days.

Change it every 2 months; 3 steps, no tools.

After the change: The dock detects a new bag; no reset needed.

Fits 3 Dreame models: D10 Plus Gen 2, L10s Plus, L40 Plus.

Bristle main brush for the D9 Max, L10 Pro and D10 Plus.

Change it every 12 months; 4 steps, no tools.

After the change: Reset the main-brush timer under Maintenance in the Dreame app.

Fits 3 Dreame models: D10 Plus, D9 Max, L10 Pro.

The replacement roller mop for the Aqua10 Roller and Aqua10 Ultra Roller. These robots mop with one roller rather than pads; slide the old one out of its cradle and click the new one in.

Change it every 6 months; 3 steps, no tools.

Fits 3 Dreame models: Aqua10 Roller, Aqua10 Roller AE, Aqua10 Ultra Roller.

Side brush for the D10 Plus and D10 Plus Gen 2.

Change it every 3 months; 3 steps, no tools.

After the change: Reset the side-brush timer under Maintenance in the Dreame app.

Fits 2 Dreame models: D10 Plus, D10 Plus Gen 2.

Flat microfibre mop cloth for the D10s Plus and D10 Plus Gen 2. Velcros to the water-tank plate.

Change it every 6 months; 3 steps, no tools.

Fits 2 Dreame models: D10 Plus Gen 2, D10s Plus.

Dust-box filter for the D9 Max and D9 Max Gen 2. Dreame says this one cannot be washed, so tap it out and replace on the timer.

Change it every 3 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Dreame app.

Fits 2 Dreame models: D9 Max, D9 Max Gen 2.

The 3 L dust bag for the L10s Ultra and L20 Ultra docks. Dreame rates one bag at about 60 days; the app tells you when it is full.

Change it every 2 months; 3 steps, no tools.

After the change: The dock detects a new bag; no reset needed.

Fits 2 Dreame models: L10s Ultra, L20 Ultra.

Three-armed side brush for the L10s Ultra and L10 Prime. It pulls straight off its post; trim hair off it monthly and replace when the arms bend.

Change it every 3 months; 3 steps, no tools.

After the change: Reset the side-brush timer under Maintenance in the Dreame app.

Fits 2 Dreame models: L10 Prime, L10s Ultra.

Dreame's TriCut roller shreds hair instead of wrapping it. Listed for the X40 Ultra, L30 Ultra S, L20 Ultra, L10s Pro Ultra Heat, L10s Ultra and L10s Plus as an alternative to the plain rubber roller.

Change it every 12 months; 4 steps, no tools.

After the change: Reset the main-brush timer under Maintenance in the Dreame app.

Fits 2 Dreame models: L10s Plus, L10s Pro Ultra Heat.

Flat microfibre mop cloth for the Z10 Pro and D10 Plus.

Change it every 6 months; 3 steps, no tools.

Fits 2 Dreame models: D10 Plus, Z10 Pro.

The 2.5 L dust bag for the D10 Plus dock, about 45 days each.

Change it every 2 months; 3 steps, no tools.

After the change: The dock detects a new bag; no reset needed.

Fits the D10 Plus.

Dust-box filter for the D10 Plus. Dreame lists it as non-washable; replace every one to three months.

Change it every 3 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Dreame app.

Fits the D10 Plus.

The 4 L dust bag for the D10s Plus dock.

Change it every 2 months; 3 steps, no tools.

After the change: The dock detects a new bag; no reset needed.

Fits the D10s Plus.

Dust bag for the D20 Pro Plus (R2566Q) dock.

Change it every 2 months; 3 steps, no tools.

After the change: The dock detects a new bag; no reset needed.

Fits the D20 Pro Plus.

Washable filter for the L20 Ultra. Same clip-on panel on the back of the dust box.

Change it every 3 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Dreame app.

Fits the L20 Ultra.

The track mop for the Aqua10 Ultra Track S (Dreame part RMP14).

Change it every 6 months; 3 steps, no tools.

Fits the Aqua10 Ultra Track S.

Washable filter for the W10 (and the same panel Dreame bundles in the W10 sterilizer kit).

Change it every 3 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Dreame app.

Fits the W10.

Anti-tangle main brush for the W10.

Change it every 12 months; 4 steps, no tools.

After the change: Reset the main-brush timer under Maintenance in the Dreame app.

Fits the W10.

The magnetic rotating mop pads for the W10.

Change it every 6 months; 4 steps, no tools.

Fits the W10.

The five-armed side brush for the W10.

Change it every 3 months; 3 steps, no tools.

After the change: Reset the side-brush timer under Maintenance in the Dreame app.

Fits the W10.

Anti-tangle main brush for the Z10 Pro.

Change it every 12 months; 4 steps, no tools.

After the change: Reset the main-brush timer under Maintenance in the Dreame app.

Fits the Z10 Pro.

Side brush for the Z10 Pro.

Change it every 3 months; 3 steps, no tools.

After the change: Reset the side-brush timer under Maintenance in the Dreame app.

Fits the Z10 Pro.

The 4 L dust bag for the Z10 Pro dock.

Change it every 2 months; 3 steps, no tools.

After the change: The dock detects a new bag; no reset needed.

Fits the Z10 Pro.