iRobot robot vacuum filters, brushes and mop cloths by part number

The three-armed edge-sweeping brush, held by one screw, for the Roomba e, i and j series and the Roomba Combo i5, j5, j7, j9+ and 10 Max. iRobot's US parts pages also list it for the 600, 700, 800 and 900 series, which use the same screw-on brush. Replace it every 12 months.

Change it every 12 months; 3 steps.

Fits 64 iRobot models: Roomba 605, Roomba 606, Roomba 610, Roomba 614, Roomba 620, Roomba 630, Roomba 650, Roomba 655, Roomba 660, Roomba 670, Roomba 671, Roomba 675 and 52 more.

The pair of rubber brushes for the Roomba e5, e6, every i series and j series robot, and the Roomba Combo i5, j5, j7, j9+ and 10 Max. They do not fit the Roomba Combo Essential. iRobot's care chart says to replace them every 6 to 12 months.

Change it every 6 months; 4 steps, no tools.

Fits 31 iRobot models: Roomba Combo 10 Max, Roomba Combo i5, Roomba Combo i5+, Roomba Combo i8, Roomba Combo i8+, Roomba Combo j5, Roomba Combo j5+, Roomba Combo j7, Roomba Combo j7+, Roomba Combo j9+, Roomba e5, Roomba e6 and 19 more.

The filter for the Roomba e5, e6, i series (i1 to i8), j7 and j9 robot vacuums and the Roomba Combo i5 and j5. It clips into the side of the bin. Do not wash it: tap it clean and replace it every two months. It does not fit the Roomba Combo j7, j9+ or 10 Max, which take their own filter.

Change it every 2 months; 4 steps, no tools.

Fits 27 iRobot models: Roomba Combo i5, Roomba Combo i5+, Roomba Combo i8, Roomba Combo i8+, Roomba Combo j5, Roomba Combo j5+, Roomba e5, Roomba e6, Roomba i1, Roomba i1+, Roomba i2, Roomba i3 and 15 more.

The main bristle brush for the Roomba 600 and 700 series, as iRobot Australia lists it (code 4625006). The flexible beater brush beside it is not included. Replace the brushes every 6 to 12 months.

Change it every 6 months; 3 steps, no tools.

Fits 24 iRobot models: Roomba 605, Roomba 606, Roomba 610, Roomba 614, Roomba 620, Roomba 630, Roomba 650, Roomba 655, Roomba 660, Roomba 670, Roomba 671, Roomba 675 and 12 more.

iRobot's replenishment kit for the Roomba 600 series: the bristle brush and flexible beater brush, one edge-sweeping side brush, three AeroVac filters and a cleaning tool. iRobot sells no single 600 series main brush outside Australia, so this kit is the maker's code for the brushes. Replace the brushes every 6 to 12 months.

Change it every 6 months; 4 steps, no tools.

Fits 20 iRobot models: Roomba 605, Roomba 606, Roomba 610, Roomba 614, Roomba 620, Roomba 630, Roomba 650, Roomba 655, Roomba 660, Roomba 670, Roomba 671, Roomba 675 and 8 more.

The AeroVac filter for every Roomba 600 series robot. It sits in the bin: press the bin release, pull the filter out, and tap it clean against the rubbish bin each week. iRobot says to replace it every two months.

Change it every 2 months; 4 steps, no tools.

Fits 20 iRobot models: Roomba 605, Roomba 606, Roomba 610, Roomba 614, Roomba 620, Roomba 630, Roomba 650, Roomba 655, Roomba 660, Roomba 670, Roomba 671, Roomba 675 and 8 more.

The bags for the Clean Base auto-empty dock that comes with the Roomba i3+, i7+, j7+, s9+ and other '+' models, the Combo j9+ Auto-Fill dock and the Combo 10 Max AutoWash dock. Change the bag when the dock's light turns red or the app says it is full. Not for the 2025 AutoEmpty and AutoWash docks.

Fits 16 iRobot models: Roomba Combo 10 Max, Roomba Combo i5+, Roomba Combo i8+, Roomba Combo j5+, Roomba Combo j7+, Roomba Combo j9+, Roomba i1+, Roomba i3+, Roomba i4+, Roomba i5+, Roomba i6+, Roomba i7+ and 4 more.

The bags for the AutoEmpty and AutoWash docks of the 2025 Roomba range: 105 and 115 Combo + AutoEmpty, Plus 405 and 505 Combo, Max 705 Vac and Combo, and the Plus 415, 515 and 575 Combo. iRobot says a bag holds up to 75 days of debris; change it when the dock or app says it is full. Not for the older Clean Base.

Fits 11 iRobot models: Roomba 105 Combo + AutoEmpty, Roomba 115 Combo + AutoEmpty, Roomba Max 705 Combo, Roomba Max 705 Vac, Roomba Max 708 Combo, Roomba Plus 405 Combo, Roomba Plus 415 Combo, Roomba Plus 505 Combo, Roomba Plus 508 Combo, Roomba Plus 515 Combo, Roomba Plus 575 Combo.

The AeroForce High-Efficiency filter for Roomba 800 and 900 series robots (860, 870, 880, 890, 960, 980 and others). It sits in the bin behind the bin door. iRobot's care chart says to clean it weekly and replace it every two months. Code 4415864 in the UK and Australia, 4636433 in the US.

Change it every 2 months; 4 steps, no tools.

Fits 9 iRobot models: Roomba 860, Roomba 866, Roomba 870, Roomba 880, Roomba 890, Roomba 960, Roomba 980, Roomba 981, Roomba 985.

The pair of rubber AeroForce extractors (front and rear) for Roomba 800 and 900 series robots. iRobot says the extractors should be replaced every six months. Code 4419704 in the UK, 4636423 in the US.

Change it every 6 months; 4 steps, no tools.

Fits 9 iRobot models: Roomba 860, Roomba 866, Roomba 870, Roomba 880, Roomba 890, Roomba 960, Roomba 980, Roomba 981, Roomba 985.

The edge-sweeping brush for the Roomba Combo Essential, Roomba 105, 205 DustCompactor, Plus 405 and 505 Combo, and Max 705 Vac. It pulls straight off its post. iRobot says to replace it every 3 to 6 months.

Change it every 3 months; 3 steps, no tools.

Fits 8 iRobot models: Roomba 105 Combo, Roomba 105 Combo + AutoEmpty, Roomba 205 DustCompactor Combo, Roomba Combo Essential, Roomba Max 705 Vac, Roomba Plus 405 Combo, Roomba Plus 505 Combo, Roomba Plus 508 Combo.

iRobot's mopping kit for the Roomba Combo i5 and Combo j5: two reusable microfibre pads. The robot pre-wets the pad with cleaning solution. It does not fit the Combo j7+ or j9+.

Fits 6 iRobot models: Roomba Combo i5, Roomba Combo i5+, Roomba Combo i8, Roomba Combo i8+, Roomba Combo j5, Roomba Combo j5+.

The filter for Roomba 700 series robots (760, 770, 780, 790). It clips into the bin. iRobot's care chart says to replace it every two months.

Change it every 2 months; 3 steps, no tools.

Fits 4 iRobot models: Roomba 760, Roomba 770, Roomba 780, Roomba 790.

The filter for the Roomba Combo j7, Combo j7+, Combo j9+ and Combo 10 Max. It is not the same as the filter in the vacuum-only j7+ and j9+. iRobot does not give an interval; it says a dirty filter weakens suction, so replace it regularly. Australian code 4787029.

Fits 4 iRobot models: Roomba Combo 10 Max, Roomba Combo j7, Roomba Combo j7+, Roomba Combo j9+.

The washable mop pad for the Roomba Combo j7, j7+, j9+ and Combo 10 Max. The robot wets the pad with cleaning solution before it mops. Australian code 4787035; two pads let one dry while the other is in use. iRobot gives no replacement interval.

Fits 4 iRobot models: Roomba Combo 10 Max, Roomba Combo j7, Roomba Combo j7+, Roomba Combo j9+.

The rubber brush for the Roomba Plus 405 Combo, Plus 505 Combo and 205 DustCompactor. Press the brush cover tabs to lift it out and twist off the caps at each end to clear hair. iRobot recommends replacing it every 6 to 12 months.

Change it every 6 months; 3 steps, no tools.

Fits 4 iRobot models: Roomba 205 DustCompactor Combo, Roomba Plus 405 Combo, Roomba Plus 505 Combo, Roomba Plus 508 Combo.

The filter for the Roomba Combo Essential and the Roomba 105 Combo (with or without the AutoEmpty dock). It clips into the bin. iRobot says to replace it every 3 to 6 months; it can be rinsed, but must be completely dry before it goes back.

Change it every 3 months; 4 steps, no tools.

Fits 3 iRobot models: Roomba 105 Combo, Roomba 105 Combo + AutoEmpty, Roomba Combo Essential.

Washable microfibre pads for the Roomba Combo Essential and Roomba 105 Combo. Hand-wash in cold water after a mopping job and let them air dry; iRobot says to replace a pad every 3 to 6 months, or after about 30 washes.

Change it every 3 months; 4 steps, no tools.

Fits 3 iRobot models: Roomba 105 Combo, Roomba 105 Combo + AutoEmpty, Roomba Combo Essential.

The filter for the Roomba Plus 405 Combo and Plus 505 Combo. There is no bin button on the side: lift the magnetic top cover, press the bin release and lift the bin out. iRobot's care charts say to replace the filter every 3 to 6 months.

Change it every 3 months; 4 steps, no tools.

Fits 3 iRobot models: Roomba Plus 405 Combo, Roomba Plus 505 Combo, Roomba Plus 508 Combo.

The round DualClean spinning mop pads for the Roomba Plus 405 and 505 Combo. The AutoWash dock washes and dries them after each job. They attach with Velcro: peel off to remove. iRobot says to replace them every 3 to 6 months, or after 180 hours of cleaning.

Change it every 3 months; 3 steps, no tools.

Fits 3 iRobot models: Roomba Plus 405 Combo, Roomba Plus 505 Combo, Roomba Plus 508 Combo.

The pair of anti-tangle rubber brushes for the Roomba Max 705 Vac and Max 705 Combo. Pinch the frame tab to lift them out and pull off the end caps to clear hair. iRobot's Max 700 care chart says to replace them every 6 to 12 months.

Change it every 6 months; 3 steps, no tools.

Fits 3 iRobot models: Roomba Max 705 Combo, Roomba Max 705 Vac, Roomba Max 708 Combo.

DualClean spinning mop pads for the Roomba Plus 415, 515 and 575 Combo. The dock washes and dries them; they attach with Velcro. iRobot says to replace them every 3 to 6 months, or after 180 hours of cleaning.

Change it every 3 months; 3 steps, no tools.

Fits 3 iRobot models: Roomba Plus 415 Combo, Roomba Plus 515 Combo, Roomba Plus 575 Combo.

The filter cartridge for the Roomba Plus 415, 515 and 575 Combo. Lift the top cover, release the bin and lift out the filter cartridge. Do not wash the filter. iRobot's care charts say to replace it every 3 to 6 months.

Change it every 3 months; 4 steps, no tools.

Fits 3 iRobot models: Roomba Plus 415 Combo, Roomba Plus 515 Combo, Roomba Plus 575 Combo.

The multi-surface bristle brush for the Roomba Plus 415, 515 and 575 Combo. Press the brush frame tabs to lift it out and remove the end cap to clear hair. iRobot recommends replacing it every 6 to 12 months.

Change it every 6 months; 3 steps, no tools.

Fits 3 iRobot models: Roomba Plus 415 Combo, Roomba Plus 515 Combo, Roomba Plus 575 Combo.

The wide pair of rubber brushes for the Roomba s9 and s9+. They are 30% wider than the 600 series brushes and fit only the s series. iRobot recommends replacing main brushes every 6 to 12 months, or as needed.

Change it every 6 months; 3 steps, no tools.

Fits 2 iRobot models: Roomba s9, Roomba s9+.

The filter for the Roomba s9 and s9+. It sits in the bin and must not be washed. iRobot's s Series care chart says to clean it weekly and replace it every two months. A single filter is also sold (US code 4650995); this listing is the 3-pack.

Change it every 2 months; 3 steps, no tools.

Fits 2 iRobot models: Roomba s9, Roomba s9+.

The five-armed corner brush for the Roomba s9 and s9+. iRobot's s Series care chart says to clean it monthly and replace it every three months.

Change it every 3 months; 3 steps, no tools.

Fits 2 iRobot models: Roomba s9, Roomba s9+.

The PowerSpin roller mop for the Roomba Max 705 Combo. It washes and scrapes itself clean as it spins. iRobot's Max 700 care chart says to replace it every 6 to 12 months.

Change it every 6 months; 4 steps, no tools.

Fits 2 iRobot models: Roomba Max 705 Combo, Roomba Max 708 Combo.

The filter for the Roomba Max 705 Combo with AutoWash dock. Lift the top cover, release the bin, open the bin door and lift the filter out; its mesh screen can be washed but must be dry before it goes back. iRobot's Max 700 care chart says to replace the filter every two months.

Change it every 2 months; 4 steps, no tools.

Fits 2 iRobot models: Roomba Max 705 Combo, Roomba Max 708 Combo.

The two edge-sweeping brushes for the Roomba Max 705 Combo, sold as three sets. iRobot's Max 700 care chart says to replace them every 3 to 6 months.

Change it every 3 months; 3 steps, no tools.

Fits 2 iRobot models: Roomba Max 705 Combo, Roomba Max 708 Combo.

The multi-surface bristle brush for the Roomba 105 Combo and 105 Vac. Press the brush frame tabs to lift it out; twist off the right-hand cap to clear hair. iRobot recommends replacing it every 6 to 12 months.

Change it every 6 months; 3 steps, no tools.

Fits 2 iRobot models: Roomba 105 Combo, Roomba 105 Combo + AutoEmpty.

Disposable damp sweeping pads for the Braava jet 240 and 250, for everyday dust and dirt; gentle enough for sealed wood floors.

Fits the Braava jet 240.

Disposable wet mopping pads for the Braava jet m6. The robot only runs with Braava jet m Series pads. Use a new pad for each job and do not pre-wet it.

Fits the Braava jet m6.

The single multi-surface brush for the Roomba Combo Essential (and Vac Essential). Press the brush frame release tabs on the underside to lift it out. iRobot's guide says to replace it every 6 to 12 months.

Change it every 6 months; 3 steps, no tools.

Fits the Roomba Combo Essential.

The filter for the Roomba Max 705 Vac (the vacuum-only Max 705 with AutoEmpty dock). It is not the filter for the Max 705 Combo. iRobot's Max 700 care chart says to replace it every two months.

Change it every 2 months; 3 steps, no tools.

Fits the Roomba Max 705 Vac.

The filter for the Roomba 205 DustCompactor Combo and Vac. It sits behind the DustCompactor bin door. iRobot's care chart says to clean it weekly and replace it every 3 to 6 months.

Change it every 3 months; 4 steps, no tools.

Fits the Roomba 205 DustCompactor Combo.

Washable microfibre pads for the Roomba 205 DustCompactor Combo. The pad slides onto the water tank under the robot. Hand-wash after mopping; iRobot says to replace pads every 3 to 6 months, or after about 30 washes.

Change it every 3 months; 4 steps, no tools.

Fits the Roomba 205 DustCompactor Combo.

Washable microfibre mop pads for the Roomba 115 Combo. Hand-wash in cold water and let them air dry. iRobot's 100/1000 care chart says to replace pads every 3 to 6 months.

Change it every 3 months; 3 steps, no tools.

Fits the Roomba 115 Combo + AutoEmpty.

The multi-surface bristle brush for the Roomba 115 Combo. iRobot recommends replacing main brushes every 6 to 12 months, or as needed.

Change it every 6 months; 3 steps, no tools.

Fits the Roomba 115 Combo + AutoEmpty.

Two washable wet mopping pads for the Braava jet 240 and 250, for use with water only. iRobot says each can be washed up to 50 times before it needs replacing.

Fits the Braava jet 240.

A washable wet mopping pad and a washable dry sweeping pad for the Braava jet m6. Rinse after use. Australian code 4632812 (US: 4632811).

Fits the Braava jet m6.

Disposable dry sweeping pads for the Braava jet m6. They use electrostatic force to pick up dust and pet hair. Use a new pad for each job.

Fits the Braava jet m6.

Two washable wet mopping pads for the Braava jet m6. Rinse after use. Australian code 4643570 (US: 4643569).

Fits the Braava jet m6.