How do I fit the 9FWFA210000?

No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.

What happens if I don't change it?

Suction drops and the vacuum may cut out on a blocked filter.

Hard floor cleaner filter

Tineco HEPA filter for GO H2O Sense

9FWFA210000

Fits 1 model · replace every 6 months

Wrong part, or your model missing? Tell us. A person checks every report.

GenuineGenuine Tineco

$34.90

Tineco Australia · 2 NovLowest genuine · Tineco Australia · checked 2 Nov

CompatibleCompatible option

See seller

No compatible seller tracked yetNo compatible seller tracked yet

Genuine: made by Tineco. Compatible: another brand.Genuine is made by Tineco. Compatible is made by another brand. Check the seller's page for the size and models it fits.

Lowest price · $34.90

Tineco Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.

Open Tineco Australia · $34.90

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Genuine Tineco

1 seller

Tineco AustraliaGenuine · checked 2 NovGenuine part · Lowest genuinechecked 2 Nov$34.90OpenGo to seller

Open cheapest seller · $34.90

Opens Tineco Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Usually every 6 months (every 6 months, Tineco says in its GO H2O series manual).

After replacing: No reset: the maker's manual describes no replacement reminder for this part.

Not due yet?

Get a nudge when your filter is due — it's every 6 months. One email two weeks before, no newsletter. Manage or stop it anytime.

How to change the 9FWFA210000 filter

Watch the guide or follow the steps.

How to use Tineco GO H2O Sense? · Tineco (official)

1Take the cleaner off its base and press the dirty water tank release to lift the tank out.
2Pull the lid off the dirty water tank and empty it.
3Grasp the recessed areas on each side of the old filter and pull it straight up out of the tank lid.
4Fit the new filter into the lid, refit the lid and put the tank back until it clicks. Tineco says never to run the GO H2O without the filter.

Every number this part goes by9FWFA210000

Retail name:: 9FWFA210000

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Your appliance model

Fits this Tineco modelGO H2O Sense

Tineco1 model

GO H2O Sense

Common questionsWhat does the 9FWFA210000 fit? · How often should I replace the 9FWFA210000? · Where can I buy the 9FWFA210000 in Australia?

What does the 9FWFA210000 fit?: The Tineco HEPA filter for GO H2O Sense (part 9FWFA210000) fits the Tineco GO H2O Sense.
How often should I replace the 9FWFA210000?: Every 6 months. It works less well as the filter fills up, so it's worth doing on time.
Where can I buy the 9FWFA210000 in Australia?: We track 1 Australian seller for the 9FWFA210000; the lowest listed price when we last checked was A$34.90 at Tineco Australia. Prices are re-checked daily and dated on this page.
How do I fit the 9FWFA210000?: No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?: Suction drops and the vacuum may cut out on a blocked filter.
Is there anything to reset afterwards?: No reset: the maker's manual describes no replacement reminder for this part.

Something looks wrong with the 9FWFA210000 match? . Reports go to a person, not a bot.