Simpson washing machine pump filters
Which drain pump filter each of the 4 Simpson front loaders sold in Australia takes, with dated prices from 2 Australian sellers, genuine and compatible side by side.
Most take the 1321368118 (4 of 4 models), from $40.99. Check yours below.
Showing 4 of 4 Simpson models · grouped by filter platform
Electrolux front loader drain pump filter insert 1321368118takes 1321368118
How to take out the pump filter on your Simpson front loader
Steps for the Electrolux front loader drain pump filter insert 1321368118 (1321368118), the pump filter 4 Simpson models take.
No clear video for this pump filter yet. The steps cover it.
- 1Switch off and unplug the machine, and let any hot water cool before you start.
- 2Put a towel down and a shallow tray in front of the machine, then open the small door at the bottom front.
- 3Let the water out slowly into the tray, emptying the tray as it fills, until no more comes out.
- 4Unscrew the filter anticlockwise, take out the insert, remove lint and objects, and rinse it under the tap.
- 5Refit the insert, screw the filter back in clockwise until it is tight so it does not leak, and close the door.
- 6If your machine's filter sits differently, its user manual shows where it is and how it comes out.
After refitting the filter
No reset needed.
Common questions
- What happens if I don't change the pump filter?
- A cracked or damaged pump filter can leak or let small objects through to the pump. A blocked one is cleaned, not changed: the machine stops draining until it is.
- Does Simpson make a compatible pump filter?
- Electrolux makes the genuine pump filter for Simpson models. Compatible pump filters for Simpson models are made by other companies to fit the same models, and Australian sellers we track list both; each part page shows the genuine and compatible prices side by side.
- Is there anything to do after refitting the pump filter on a Simpson front loader?
- No reset needed.
All 4 Simpson front loaders we list, A to Z
Brand names describe compatibility only; FitMatch is independent of Simpson. Fitment sources are recorded on every model page.