Philips filter
Which filter cartridge each of the 10 Philips jugs and bottles sold in Australia takes, with dated prices from 2 Australian sellers, genuine and compatible side by side.
No models of that shape yet.
How to change your Philips filter
Steps for the Advanced Carbon Block Plus Filter (ADD566P1/37) (ADD566P1/37), the filter 3 Philips models take. Change it every 3 months.
- 1Lift the tank lid and twist the old cartridge out of its holder.
- 2Rinse the new cartridge, then twist it into the holder until it locks.
- 3Fill the tank and run one full tank through before drinking.
- 4Hold the filter button until the indicator resets.
Different steps for Micro X-Clean Filter Cartridge (3-pack, AWP211/79) · Different steps for Micro X-Clean Water Jug Filter Cartridge (6-pack, AWP212/79) · Different steps for Micro X-Clean Softening+ Filters (6-pack, AWP230P6/79) · Different steps for GoZero Daily Filter Cartridge (3-pack, AWP285/79) · Different steps for Micro X-Clean pH Balance Alkaline Filter (2-pack, AWP240P2/79)
Reset the cartridge reminder
Hold the dispenser's filter button after fitting until the indicator resets.
Get a reminder when your Philips filter is due
Most Philips models here change it every 3 months. One email two weeks before, no newsletter. Type the model from the sticker and we set the date for that model.
Common questions
- How often should I change a Philips filter?
- Every 3 months for the Advanced Carbon Block Plus Filter (ADD566P1/37) (ADD566P1/37), the filter most Philips models here take. Each model page shows the interval for its own filter.
- What happens if I don't change the filter?
- The cartridge stops reducing chlorine and hardness and simply passes tap water through slowly.
- How do I reset the cartridge reminder on a Philips jug?
- Hold the dispenser's filter button after fitting until the indicator resets.
Brand names describe compatibility only; FitMatch is independent of Philips. Fitment sources are recorded on every model page.