Sharp air purifier filters by part number

The genuine deodorising filter for Sharp's compact Plasmacluster FP-J30J purifier. It sits behind the back panel with the FZ-F30HFE HEPA filter and gradually absorbs odours as air passes through. The Replace Filter light comes on after about 17,500 hours in Sleep mode, sooner at higher speeds. Do not wash it. Some Sharp material prints the code as FZ-F30HDE.

Change it every 2 years; 5 steps, no tools.

After the change: Plug the purifier back in, press the POWER button and hold the OFF TIMER button for 3 seconds.

Fits the FP-J30J-B.

The genuine HEPA filter for Sharp's compact Plasmacluster FP-J30J purifier. It sits behind the back panel with the FZ-F30DFE deodorising filter. The Replace Filter light comes on after about 17,500 hours in Sleep mode (about 2 years of round-the-clock use), sooner at higher speeds. Do not wash it. After fitting, press POWER and hold the OFF TIMER button for 3 seconds.

Change it every 2 years; 5 steps, no tools.

After the change: Plug the purifier back in, press the POWER button and hold the OFF TIMER button for 3 seconds.

Fits the FP-J30J-B.

The genuine HEPA filter for Sharp's Plasmacluster FX-J80J-W purifier. It sits behind the back panel with the FZ-J80DFE deodorising filter. Sharp rates both at about 2 years after opening, based on five cigarettes a day; the filter light blinks slowly, then quickly, as they fall due. Do not wash it. Hold the RESET button for 3 seconds after fitting.

Change it every 2 years; 6 steps, no tools.

After the change: After replacing the filters, hold the RESET button for more than 3 seconds to clear the filter light.

Fits the FX-J80J-W.