The Sharp FX-J80J-W takes the Sharp HEPA Filter FZ-J80HFE (FX-J80J-W) as its filter; replace it every 2 years; Australian sellers list it from A$85.10 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your air purifier
Sharp FX-J80J-W
Air purifier
Confirmed against Sharp's listConfirmed against Sharp's own compatibility list
Not yours? ChangeSave it · remind me every 2 yearsTakes the FZ-J80HFE filter
HEPA Filter FZ-J80HFE (FX-J80J-W) · replace every 2 years · check the code printed on your old filter before ordering.
Your air purifier
Air purifier
Confirmed against Sharp's listConfirmed against Sharp's own compatibility list
Takes the FZ-J80HFE
Filter · every 2 years · check the code on your old filter.
Other Sharp air purifiers and their filters
The FZ-J80HFE fits the FX-J80J-W only. These Sharp models take a different filter:
GenuineGenuine Sharp
See seller
No genuine seller tracked yetNo genuine seller tracked yet
CompatibleCompatible option
$85.10
Amazon AU · 26 OctAmazon AU · checked 26 Oct
Check sellerCheck seller details
Genuine: made by Sharp. Compatible: another brand. Check certification on the seller's page.Genuine is made by Sharp. Compatible is made by another brand. Check the seller's certification details before choosing.
Lowest compatibleLowest compatible price · $85.10
Amazon AU. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Compatible options
1 seller
Opens Amazon AU in a new tab. Their page is the source of truth for price, delivery and returns.
Not due yet?
Get a nudge when your filter is due — it's every 2 years. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the filter in your Sharp FX-J80J-W
Watch the guide or follow the steps.
- 1Switch off and unplug the purifier.
- 2Remove the back panel (it is also the pre-filter).
- 3Take out the old HEPA and deodorising filters. Take the new filters out of their plastic bags.
- 4Put the HEPA filter in first, with its tag facing you, then fit the deodorising filter in front of it.
- 5Refit the back panel until it clicks.
- 6Plug in and hold the RESET button for more than 3 seconds to clear the filter light.
Every number this part goes by
- Retail name:
- FZ-J80HFE
- Retail name:
- FZJ80HFE
- Retail name:
- Sharp FZ-J80HFE
Sellers list any of these; they are the same part.
About your Sharp FX-J80J-W
Sharp air purifier — Plasmacluster FX-J80. Its filter is the HEPA Filter FZ-J80HFE (FX-J80J-W), part FZ-J80HFE, changed every 2 years.
Where the model number is: The model number is on the rating label on the bottom or back of the purifier; the old filter usually has its own code printed on the frame.
Fits this Sharp model
Sharp1 model
Common questions
- Which filter fits the Sharp FX-J80J-W?
- The Sharp FX-J80J-W takes the Sharp HEPA Filter FZ-J80HFE (FX-J80J-W). Compatible filters made to the same specification also fit.
- How often should I replace the filter in my Sharp FX-J80J-W?
- Every 2 years. It works less well as the filter fills up, so it's worth doing on time.
- Where can I buy the FZ-J80HFE in Australia?
- We track 1 Australian seller for the FZ-J80HFE; the lowest listed price when we last checked was A$85.10 at Amazon AU. Prices are re-checked daily and dated on this page.
- How do I fit the FZ-J80HFE in a Sharp FX-J80J-W?
- No tools, a few minutes: 6 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- The fan works harder for less airflow, and the carbon layer stops taking smells out well before the filter looks dirty.
- How do I reset the filter light?
- After replacing the filters, hold the RESET button for more than 3 seconds to clear the filter light.
Something looks wrong with the FX-J80J-W match? . Reports go to a person, not a bot.