FitMatch

The Aqua One ClearView 300 takes the Aqua One Carbon Cartridge 47c (25047C) for ClearView 300 as its carbon filter; replace it every 2 months; Australian sellers list it from A$9.88 as of 7 November 2026. Fitment confirmed against the manufacturer's compatibility list.

Aqua One ClearView 300

Your aquarium filter

Aquarium filter

Confirmed against Aqua One's list

Not yours? ChangeSave it · remind me
25047C

Takes the 25047C

Carbon filter · every 2 months · check the code on your old filter.

Other Aqua One aquarium filters and their replacement media

The 25047C fits the ClearView 300 only. These Aqua One models take a different carbon filter:

Genuine

$9.88

Aquarium Spare Parts · 7 Nov

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Aqua One. Compatible: another brand.

Lowest price · $9.88

Aquarium Spare Parts. Every seller we track is listed below. Some links earn us a commission.

Open Aquarium Spare Parts

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Aquarium Spare PartsGenuine · checked 7 Nov$9.88Open
Open cheapest seller · $9.88

Opens Aquarium Spare Parts in a new tab. Their page is the source of truth for price, delivery and returns.

Not due yet?

Get a nudge when your carbon filter is due — it's every 2 months. One email two weeks before, no newsletter. Manage or stop it anytime.

Also saves the model to a FitMatch account under this address; the email signs you in, no password.

How to change the carbon filter in your Aqua One ClearView 300

Watch the guide or follow the steps.

Aqua One Clear View Hang on Filter · Aqua One (official)
  1. 1Unplug the filter at the power supply and lift it off the back of the aquarium.
  2. 2Remove the dust cover (lid), drain the water left in the filter body over a sink or bucket, and take out the carbon cartridge and the sponge.
  3. 3Rinse the sponge gently in a bucket of aquarium water, only to remove solid waste: Aqua One says never to rinse it with tap water. Shake the carbon cartridge in the same water to flush out waste.
  4. 4Fit a new carbon cartridge every 6–8 weeks. On the ClearView 100 and 280 it slides into the furthest grooves with the wool facing the back of the filter; the sponge sits between it and the front.
  5. 5Hang the filter back on the aquarium, fill the filter body with aquarium water until it overflows back into the tank, replace the dust cover and turn it on.
Every number this part goes by
Retail name:
25047C
Retail name:
47C

Sellers list any of these; they are the same part.

About your ClearView 300

Aqua One aquarium filter — ClearView hang-on filter. Its carbon filter is the Carbon Cartridge 47c (25047C) for ClearView 300, part 25047C, changed every 2 months.

Where the model number is: The model is on the filter's lid, motor head or a label on its side (Fluval 307, Eheim Classic 2215). For a tank with a built-in filter, use the tank's name.

Fits this Aqua One model

Aqua One1 model

Common questions
Which carbon filter fits the Aqua One ClearView 300?
The Aqua One ClearView 300 takes the Aqua One Carbon Cartridge 47c (25047C) for ClearView 300.
How often should I replace the carbon filter in my Aqua One ClearView 300?
Every 2 months. It works less well as the filter fills up, so it's worth doing on time.
Where can I buy the 25047C in Australia?
We track 1 Australian seller for the 25047C; the lowest listed price when we last checked was A$9.88 at Aquarium Spare Parts. Prices are re-checked daily and dated on this page.
How do I fit the 25047C in an Aqua One ClearView 300?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Spent carbon stops removing odours and discolouration, and clogged pads slow the flow, so the filter moves less water through the tank.

Something looks wrong with the ClearView 300 match? . Reports go to a person, not a bot.