FitMatch

The Aqua One Reflex 26 takes the Aqua One Sponge 126s (25126S) for Reflex 26 as its filter media; Australian sellers list it from A$7.88 as of 30 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Your aquarium filter

Aquarium filter

Confirmed against Aqua One's list

25126S

Takes the 25126S

Filter media · check the code on your old filter.

Other Aqua One aquarium filters and their replacement media

The 25126S fits the Reflex 26 only. These Aqua One models take a different filter media:

Genuine

$7.88

Aquarium Spare Parts · 30 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Aqua One. Compatible: another brand.

Lowest price · $7.88

Aquarium Spare Parts. Every seller we track is listed below. Some links earn us a commission.

Open Aquarium Spare Parts

Other parts this aquarium filter takes

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $7.88

Opens Aquarium Spare Parts in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it clogs, breaks down or no longer holds its shape, Aqua One says; until then rinse it in a bucket of aquarium water each time you clean the filter.

How to change the filter media in your Aqua One Reflex 26

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Unplug all the aquarium's equipment, then lift off the light unit and lid and put them somewhere safe.
  2. 2Open the filter compartment and take out the sponge and the cartridges (carbon, and ceramic if your tank has one).
  3. 3Take some water out of the aquarium and rinse the sponge and cartridges in it. Aqua One says never to rinse the sponge under the tap, as that kills the beneficial bacteria. If needed, siphon waste out of the filter chambers.
  4. 4Put the sponge back, or fit a new one once the old one blocks up or breaks down.
  5. 5Refit everything, replace the lid and light unit, check your hands and plugs are dry, then turn the power back on and check the equipment over the next half hour.
Every number this part goes by
Retail name:
126S
Retail name:
25126S

Sellers list any of these; they are the same part.

About your Reflex 26

Aqua One aquarium filter — Reflex aquarium (discontinued). Its filter media is the Sponge 126s (25126S) for Reflex 26, part 25126S.

Also in this aquarium filter: Aqua One Ceramic Cartridge 127c (25127C) for Reflex 26 and Reflex 35, Aqua One Carbon Cartridge 126c (25126C) for Reflex 26 and Reflex 35 (every 2 months).

Where the model number is: The model is on the filter's lid, motor head or a label on its side (Fluval 307, Eheim Classic 2215). For a tank with a built-in filter, use the tank's name.

Fits this Aqua One model

Aqua One1 model

Common questions
Which filter media fits the Aqua One Reflex 26?
The Aqua One Reflex 26 takes the Aqua One Sponge 126s (25126S) for Reflex 26.
Where can I buy the 25126S in Australia?
We track 1 Australian seller for the 25126S; the lowest listed price when we last checked was A$7.88 at Aquarium Spare Parts. Prices are re-checked daily and dated on this page.
How do I fit the 25126S in an Aqua One Reflex 26?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Spent carbon stops removing odours and discolouration, and clogged pads slow the flow, so the filter moves less water through the tank.

Something looks wrong with the Reflex 26 match? . Reports go to a person, not a bot.