Kenwood blender blades and parts
Which blade and other parts each of the 2 Kenwood blenders sold in Australia takes, with dated prices from 1 Australian seller.
Showing 2 of 2 Kenwood models · grouped by part
BL237 liquidiser and mill sealing ringtakes KW714337
BLP41 blade assembly with sealtakes KW717466
How to change the blade on your Kenwood blender
Steps for the BLP41 blade assembly with seal (KW717466), the blade 1 Kenwood model takes.
No clear video for this blade yet. The steps cover it.
- 1Switch off and unplug, then lift the goblet off the power unit.
- 2Empty the goblet and unscrew the blade unit by turning it to the unlock position. Take care: the blades are sharp.
- 3Fit the sealing ring into the new blade unit so it sits in the grooved area; leaking will occur if it is damaged or fitted wrongly.
- 4Screw the blade assembly onto the goblet until it is fully tightened (check the open and close marks under the blade unit), then lock the goblet onto the power unit.
Different steps for BL237 liquidiser and mill sealing ring · Different steps for BLP41 goblet seal set (3)
After fitting the new blade
No reset: the BLP41 has no blade reminder.
Common questions
- What happens if I don't change the blade?
- Blunt blades blend more slowly and leave chunks.
- Is there anything to do after changing the blade on a Kenwood blender?
- No reset: the BLP41 has no blade reminder.
All 2 Kenwood blenders we list, A to Z
Brand names describe compatibility only; FitMatch is independent of Kenwood. Fitment sources are recorded on every model page.