FitMatch

The NutriBullet 1200 Series takes the NutriBullet 1000/1200W Blade (1200 Series, Pro+ 1200, Balance) (part NBM-BA041) as its blade; replace it every 6 months; Australian sellers list it from A$27.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Your personal blender

Personal blender

Confirmed against NutriBullet's list

Not yours? ChangeSave it · remind me
NBM-BA041

Takes the NBM-BA041

Blade · every 6 months · check the code on your old part.

Other NutriBullet personal blenders that take the NBM-BA041

Genuine

$27.00

Amazon AU · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by NutriBullet. Compatible: another brand.

Lowest price · $27.00

Amazon AU. Every seller we track is listed below. Some links earn us a commission.

Open Amazon AU

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

Amazon AUGenuine · checked 28 Oct$27.00Open
NutriBullet AustraliaGenuine · checked 2 Nov$29.95Open
Open cheapest seller · $27.00

Opens Amazon AU in a new tab. Their page is the source of truth for price, delivery and returns.

Not due yet?

Get a nudge when your blade is due — it's every 6 months. One email two weeks before, no newsletter. Manage or stop it anytime.

Also saves the model to a FitMatch account under this address; the email signs you in, no password.

How to change the blade in your NutriBullet 1200 Series

Watch the guide or follow the steps.

nutribullet Pro+ 1200 | Setting up the personal blender for first use · nutribullet Europe (official)
  1. 1Unplug the motor base and wait for the blades to stop before you lift the cup off.
  2. 2Turn the cup upright and unscrew the old blade. The blades are sharp: hold the blade by its plastic base.
  3. 3Check the gasket is seated all the way round inside the new blade. Don't pull it out: NutriBullet says removing it damages the blade and causes leaks.
  4. 4Fill the cup no higher than the MAX line, screw the new blade on and twist until it is tightly sealed, then turn the cup over and push and twist it onto the motor base.
  5. 5Wash the blade by hand in lukewarm water, not in the dishwasher, and dry it on its side.
Every number this part goes by
Retail name:
NBM-BA041
Retail name:
NBM-BA041AMZ

Sellers list any of these; they are the same part.

About your 1200 Series

NutriBullet blender, personal blender — NutriBullet 1200. Its blade is the 1000/1200W Blade (1200 Series, Pro+ 1200, Balance), part NBM-BA041, changed every 6 months.

Where the model number is: The model is on the label under the motor base, and on the box. Unplug the blender first.

Fits these 4 NutriBullet models

1000 Mega. NutriBullet's AU store names a '1000 Series' for its 1000/1200W Blade (NBM-BA041) and the 1000 Mega for the Cross Blade (NBM-BA031). Match your old blade to the photos before you order.

Common questions
Which blade fits the NutriBullet 1200 Series?
The NutriBullet 1200 Series takes the NutriBullet 1000/1200W Blade (1200 Series, Pro+ 1200, Balance) (part NBM-BA041).
How often should I replace the blade in my NutriBullet 1200 Series?
Every 6 months, or sooner if it looks worn.
Where can I buy the NBM-BA041 in Australia?
We track 2 Australian sellers for the NBM-BA041; the lowest listed price when we last checked was A$27.00 at Amazon AU. Prices are re-checked daily and dated on this page.
How do I fit the NBM-BA041 in a NutriBullet 1200 Series?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Blunt blades blend more slowly and leave chunks.
Is there anything to reset afterwards?
No reset: NutriBullet personal blenders have no blade reminder.

Something looks wrong with the 1200 Series match? . Reports go to a person, not a bot.