A&D Medical blood pressure monitor cuffs
Which cuff each of the 5 A&D Medical blood pressure monitors sold in Australia takes, and the arm size each cuff is for.
Most take the UA-CUFBOXAU-C (4 of 5 models). Check yours below.
Showing 5 of 5 A&D Medical models · grouped by part
A&D UA series adult arm cuff (22–32 cm)takes UA-CUFBOXAU-C
A&D UA series semi-large arm cuff (23–37 cm)takes UA-CUFBOXSL-C
How to change the cuff on your A&D Medical monitor
Steps for the A&D UA series adult arm cuff (22–32 cm) (UA-CUFBOXAU-C), the cuff 4 A&D Medical models take.
- 1Pull the old cuff's air connector plug out of the air socket on the monitor.
- 2Insert the new cuff's air connector plug into the air socket firmly.
- 3With your palm facing up, wrap the cuff on your bare upper arm 1–2 cm above the inside of the elbow, leaving room for one or two fingers under it.
- 4Check the index mark points within the proper fit range printed on the cuff. If it doesn't, A&D says to get a different size.
After changing the cuff
No reset. A&D's manual describes no cuff-replacement reminder.
Common questions
- What happens if I don't change the cuff?
- A cuff that leaks air will not inflate properly, and the monitor may show an error instead of a reading.
- Is there anything to reset after changing the cuff on an A&D Medical monitor?
- No reset. A&D's manual describes no cuff-replacement reminder.
All 5 A&D Medical blood pressure monitors we list, A to Z
Brand names describe compatibility only; FitMatch is independent of A&D Medical. Fitment sources are recorded on every model page.