FitMatch

The A&D Medical UA-651SL takes the A&D UA series semi-large arm cuff (23–37 cm) (part UA-CUFBOXSL-C) as its cuff. Fitment confirmed against the manufacturer's compatibility list.

A&D Medical UA-651SL

Your blood pressure monitor

Upper arm blood pressure monitor

Confirmed against A&D Medical's list

Takes the UA-CUFBOXSL-C

Cuff · check the code on your old part.

A&D lists the UA-CUFBOXSL-C as its replacement cuff; the monitor comes with a semi-large cuff for arms 22–37 cm.

Other A&D Medical blood pressure monitors and their cuffs and adapters

The UA-CUFBOXSL-C fits the UA-651SL only. These A&D Medical models take a different cuff:

Genuine

See seller

A&D Medical Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by A&D Medical. Compatible: another brand.

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

How long it lasts

Replace it when it becomes worn; A&D rates an arm cuff's useful life at 2 years when used six times a day.

After replacing: No reset. A&D's manual describes no cuff-replacement reminder.

How to change the cuff in your A&D Medical UA-651SL

Watch the guide or follow the steps.

Good Practice for Blood Pressure Monitors | A&D Medical · A&D Company, Limited (official)
  1. 1Pull the old cuff's air connector plug out of the air socket on the monitor.
  2. 2Insert the new cuff's air connector plug into the air socket firmly.
  3. 3With your palm facing up, wrap the cuff on your bare upper arm 1–2 cm above the inside of the elbow, leaving room for one or two fingers under it.
  4. 4Check the index mark points within the proper fit range printed on the cuff. If it doesn't, A&D says to get a different size.
Every number this part goes by
Retail name:
A&D semi-large cuff
Retail name:
UA-CUFBOXSL
Retail name:
UA-CUFBOXSL-C

Sellers list any of these; they are the same part.

About your UA-651SL

A&D Medical blood pressure monitor, upper arm blood pressure monitor. Its cuff is the A&D UA series semi-large arm cuff (23–37 cm), part UA-CUFBOXSL-C.

Where the model number is: The model is on the label under or on the back of the monitor, and on the box (Omron HEM-7121, A&D UA-767F). Omron also prints a name such as Standard or EZ on the front. The cuff's own code and arm size are printed on the cuff.

Fits this A&D Medical model

A&D Medical1 model

A&D lists the UA-CUFBOXSL-C as its replacement cuff; the monitor comes with a semi-large cuff for arms 22–37 cm.

Common questions
Which cuff fits the A&D Medical UA-651SL?
The A&D Medical UA-651SL takes the A&D UA series semi-large arm cuff (23–37 cm) (part UA-CUFBOXSL-C). A&D lists the UA-CUFBOXSL-C as its replacement cuff; the monitor comes with a semi-large cuff for arms 22–37 cm.
Where can I buy the UA-CUFBOXSL-C in Australia?
We link to 1 Australian seller for the UA-CUFBOXSL-C; the seller's page shows the current price.
How do I fit the UA-CUFBOXSL-C in an A&D Medical UA-651SL?
No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A cuff that leaks air will not inflate properly, and the monitor may show an error instead of a reading.
Is there anything to reset afterwards?
No reset. A&D's manual describes no cuff-replacement reminder.

Something looks wrong with the UA-651SL match? . Reports go to a person, not a bot.