Chainsaw chain
Ozito PXC 160mm Pruning Chainsaw Chain PCC-160 (28 drive links)
PCC-160
Fits 2 models
Wrong part, or your model missing? Tell us. A person checks every report.
GenuineGenuine Ozito
See seller
Bunnings · 28 OctBunnings · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Ozito. Compatible: another brand.Genuine is made by Ozito. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
How long it lasts
Replace it when it is worn or no longer cuts cleanly after sharpening.
After replacing: No reset needed. Check the chain tension every 10 minutes of use, Ozito says.
How to change the PCC-160 chain
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Switch the pruning chainsaw off and remove the battery. Wear gloves: the cutters are sharp.
- 2Lift the tab on the side cover lock, unscrew it anticlockwise and remove the side cover.
- 3Fit the new chain in the groove on the guide bar with the cutters facing the direction of rotation.
- 4Put the bar and chain in place with the chain around the sprocket and the pin through the hole in the bar.
- 5Refit the side cover and lock but do not fully tighten it yet; adjust the chain tension, then tighten the lock.
Every number this part goes by
- Retail name:
- PCC-160
- Retail name:
- PCC160
Sellers list any of these; they are the same part.
Will it fit your appliance?
Type your model number and we'll check it against the makers' lists.
Fits these 2 Ozito models
Ozito2 models
Takes PCC-160 (160 mm bar, 28 drive links).
Common questions
- What does the PCC-160 fit?
- The Ozito PXC 160mm Pruning Chainsaw Chain PCC-160 (28 drive links) fits the Ozito PXBPCK-1825 and PXBPCS-1815.
- Where can I buy the PCC-160 in Australia?
- We link to 1 Australian seller for the PCC-160; the seller's page shows the current price.
- How do I fit the PCC-160?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A blunt or stretched chain cuts slowly, throws dust instead of chips, and makes the saw harder to control.
- Is there anything to reset afterwards?
- No reset needed. Check the chain tension every 10 minutes of use, Ozito says.
Something looks wrong with the PCC-160 match? . Reports go to a person, not a bot.