The Ozito PXBPCS-1815 takes the Ozito PXC 160mm Pruning Chainsaw Chain PCC-160 (28 drive links) as its chain. Fitment confirmed against the manufacturer's compatibility list.
Your chainsaw
Ozito PXBPCS-1815
Chainsaw
Confirmed against Ozito's listConfirmed against Ozito's own compatibility list
Not yours? Change
Takes the PCC-160 chain
PXC 160mm Pruning Chainsaw Chain PCC-160 (28 drive links) · check the code on your old part before ordering.
Takes PCC-160 (160 mm bar, 28 drive links).
Your chainsaw
Chainsaw
Confirmed against Ozito's listConfirmed against Ozito's own compatibility list
Takes the PCC-160
Chain · check the code on your old part.
Takes PCC-160 (160 mm bar, 28 drive links).
Other Ozito chainsaws that take the PCC-160
GenuineGenuine Ozito
See seller
Bunnings · 28 OctBunnings · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Ozito. Compatible: another brand.Genuine is made by Ozito. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
How long it lasts
Replace it when it is worn or no longer cuts cleanly after sharpening.
After replacing: No reset needed. Check the chain tension every 10 minutes of use, Ozito says.
How to change the chain in your Ozito PXBPCS-1815
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Switch the pruning chainsaw off and remove the battery. Wear gloves: the cutters are sharp.
- 2Lift the tab on the side cover lock, unscrew it anticlockwise and remove the side cover.
- 3Fit the new chain in the groove on the guide bar with the cutters facing the direction of rotation.
- 4Put the bar and chain in place with the chain around the sprocket and the pin through the hole in the bar.
- 5Refit the side cover and lock but do not fully tighten it yet; adjust the chain tension, then tighten the lock.
Every number this part goes by
- Retail name:
- PCC-160
- Retail name:
- PCC160
Sellers list any of these; they are the same part.
About your Ozito PXBPCS-1815
Ozito chainsaw — PXC 18V. Its chain is the PXC 160mm Pruning Chainsaw Chain PCC-160 (28 drive links), part PCC-160.
Where the model number is: The model is on the rating plate on the saw's housing (STIHL MS 170, Husqvarna 135 Mark II, Ryobi OCS1830BL). The chain's code is stamped on the drive links or printed on its box, and the bar length is on the bar.
Fits these 2 Ozito models
Ozito2 models
Takes PCC-160 (160 mm bar, 28 drive links).
Common questions
- Which chain fits the Ozito PXBPCS-1815?
- The Ozito PXBPCS-1815 takes the Ozito PXC 160mm Pruning Chainsaw Chain PCC-160 (28 drive links). Takes PCC-160 (160 mm bar, 28 drive links).
- Where can I buy the PCC-160 in Australia?
- We link to 1 Australian seller for the PCC-160; the seller's page shows the current price.
- How do I fit the PCC-160 in an Ozito PXBPCS-1815?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A blunt or stretched chain cuts slowly, throws dust instead of chips, and makes the saw harder to control.
- Is there anything to reset afterwards?
- No reset needed. Check the chain tension every 10 minutes of use, Ozito says.
Something looks wrong with the PXBPCS-1815 match? . Reports go to a person, not a bot.