The STIHL MS 194 T takes the STIHL 61 PS3 Pro saw chain 3699 000 0044 (44 drive links, 30 cm bar) as its chain; Australian sellers list it from A$36.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your chainsaw
STIHL MS 194 T
Chainsaw
Confirmed against STIHL's listConfirmed against STIHL's own compatibility list
Not yours? Change
Takes the 3699 000 0044 chain
61 PS3 Pro saw chain 3699 000 0044 (44 drive links, 30 cm bar) · check the code on your old part before ordering.
Takes 3699 000 0044 (44 drive links) on a 30 cm bar; 3699 000 0050 (50) on 35 cm.
Your chainsaw
Chainsaw
Confirmed against STIHL's listConfirmed against STIHL's own compatibility list
Takes the 3699 000 0044
Chain · check the code on your old part.
Takes 3699 000 0044 (44 drive links) on a 30 cm bar; 3699 000 0050 (50) on 35 cm.
Other STIHL chainsaws that take the 3699 000 0044
GenuineGenuine STIHL
$36.00
STIHL Australia · 28 OctLowest genuine · STIHL Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by STIHL. Compatible: another brand.Genuine is made by STIHL. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $36.00
STIHL Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
This chainsaw also takes a spark plug
- NGK CMR6H spark plugOpen Power Mowers$8.80
STIHL approves NGK CMR6H; gap 0.5 mm, replace after every 100 hours of runtime. (STIHL Australia sells no service kit for the MS 194 T.) Separate from the chain.
Compare 3 sellers
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens STIHL Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it once any cutter's service marks are no longer visible, STIHL says; check the chain before work and sharpen it when it is blunt.
After replacing: No reset needed. Check the chain tension often while a new chain beds in.
How to change the chain in your STIHL MS 194 T
Watch the guide or follow the steps.
- 1Stop the engine and engage the chain brake. On a battery saw, take the battery out; on an electric saw, unplug it. Put on sturdy work gloves: the cutters are sharp.
- 2Undo the nut and take off the chain sprocket cover. On models with the quick chain tensioner (C-B, C-BE), open the wing-nut handle and undo the wing nut instead.
- 3Slacken the chain (turn the tensioning screw anticlockwise, or the tensioning gear clockwise on quick-tensioner models), then lift off the guide bar and the old chain.
- 4Fit the new chain in the bar groove so the arrows on the tie straps on top of the bar point in the direction of rotation, and seat the drive links on the chain sprocket.
- 5Put the bar back on with the tensioner peg in the hole in the bar, then turn the tensioning screw clockwise (the tensioning gear anticlockwise on quick-tensioner models) until the chain fits snugly against the bar and the drive links sit in the groove.
- 6Refit the chain sprocket cover flush with the saw and tighten the nut firmly (close the wing-nut handle on quick-tensioner models). STIHL says the chain expands and contracts as you cut, so check the tension regularly.
Every number this part goes by
- Retail name:
- 3699 000 0044
- Retail name:
- 3699-000-0044
- Retail name:
- 36990000044
- Retail name:
- 61 PS3 Pro 44
- Retail name:
- 61PS3Pro 44
Sellers list any of these; they are the same part.
About your STIHL MS 194 T
STIHL chainsaw — Top-handle chainsaws. Its chain is the 61 PS3 Pro saw chain 3699 000 0044 (44 drive links, 30 cm bar), part 3699 000 0044.
Other chains the maker lists for this chainsaw: STIHL 61 PS3 Pro saw chain 3699 000 0050 (50 drive links, 35 cm bar). With a 35 cm (14") bar: 50 drive links.
Also in this chainsaw: NGK CMR6H spark plug. STIHL approves NGK CMR6H; gap 0.5 mm, replace after every 100 hours of runtime. (STIHL Australia sells no service kit for the MS 194 T.).
Where the model number is: The model is on the rating plate on the saw's housing (STIHL MS 170, Husqvarna 135 Mark II, Ryobi OCS1830BL). The chain's code is stamped on the drive links or printed on its box, and the bar length is on the bar.
Fits these 3 STIHL models
STIHL3 models
MS 194 T. Takes 3699 000 0044 (44 drive links) on a 30 cm bar; 3699 000 0050 (50) on 35 cm.
MSA 220 T. STIHL Australia sells the MSA 220 T with a 30 cm or 35 cm bar (3/8" P, 1.1 mm): 44 drive links for 30 cm, 50 for 35 cm. STIHL's manual allows 61 PS3 Pro (3699) or 61 PMM3 (3610) chain.
MS 201 TC-M. With a 30 cm (12") bar: 44 drive links.
Common questions
- Which chain fits the STIHL MS 194 T?
- The STIHL MS 194 T takes the STIHL 61 PS3 Pro saw chain 3699 000 0044 (44 drive links, 30 cm bar). Takes 3699 000 0044 (44 drive links) on a 30 cm bar; 3699 000 0050 (50) on 35 cm.
- Where can I buy the 3699 000 0044 in Australia?
- We track 1 Australian seller for the 3699 000 0044; the lowest listed price when we last checked was A$36.00 at STIHL Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 3699 000 0044 in a STIHL MS 194 T?
- 6 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A blunt or stretched chain cuts slowly, throws dust instead of chips, and makes the saw harder to control.
- Is there anything to reset afterwards?
- No reset needed. Check the chain tension often while a new chain beds in.
Something looks wrong with the MS 194 T match? . Reports go to a person, not a bot.